You seem like you know what your talking, all im trying to do with the
serial port is use my external modem, my internal is a dumb winmodem
thus  I cant use it. From what I understand I have 4 solutions to my
modem problems
1. Buy a port replicator
2. Buy a USB Modem
3. Buy a PCMCIA modem
4. Buy a USB-RS232 adapter

As far as my research goes a USB modem or PCMCIA modem seems best. I was
looking at /etc/defaults/pccard.conf and it had a decent list of USB
modems(I amuse they all work within FreeBSD). I could do this. Or get a
PCMCIA modem(pccard if im not mistaken). 

I don't have a lot of money so I buy something it NEEDS to work.
So my question is; What solution seems sense to you people and why. And
if you've experienced my problem, what did you choose, and be sure to
include make and model so I can go out and get the same :)

-----Original Message-----
From: Bruce M Simpson [mailto:[EMAIL PROTECTED]] 
Sent: Wednesday, October 16, 2002 4:04 AM
To: Vladimir B. Grebenschikov
Cc: Pookie; [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Port Replicator

On Wed, Oct 16, 2002 at 02:48:17PM +0400, Vladimir B.  Grebenschikov
wrote:
> Do not sure about your SONY, but on my VAIO PCG-Z505S I have absolutly
> not problem with port replicator with and without AC power.
> For me SIO chip actually located on Notebook  motherboard and detected
> not depending on plugging port replicator.
> If I really want to use COM-port I need connect port replicator with 
> db9 connector.

This sounds very similar to how my Z600 works (which works without a
hitch,
the sio chip is integrated into the notebook's chipset). I would imagine
the
FX series are similar.

If you have a free PCMCIA slot, though, there is always the alternative
of a sio card, which are available very inexpensively these days. I
would
recommend this over the use of a USB-RS232 adapter, because the ASICs
used by these products vary widely and may not have driver support.

BMS




To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message

Reply via email to