Sorry the message below was incomplete... also wanted to include this from the boot log file:
adv0: <AdvanSys ASC1200B SCSI controller> port 0x6200-0x623f irq 10 at device 15.0 on pci0 adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 20 ... Waiting 15 seconds for SCSI devices to settle ... cd0 at adv0 bus 0 target 4 lun 0 cd0: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Logical unit not ready, cause not reportable Thanks for any help Goodwin ----- Original Message ----- From: Goodwin Lawlor To: [EMAIL PROTECTED] Sent: Tuesday, October 29, 2002 1:39 PM Subject: Can't read or write SCSI cd-writer Hi, Recently installed FreeBSD4.5. Installation went fine except I can't write or read the SCSI HP SureStore 6020 cd-writer. Here's what I've tried: # mount -t cd9660 /dev/cd0a /mnt cd9660: /dev/cd0a: Input/output error # mount -t cd9660 /dev/cd0c /mnt cd9660: /dev/cd0c: Input/output error # mount -t cd9660 /dev/cd1a /mnt cd9660: /dev/cd1a: Device not configured # mount -t cd9660 /dev/cd1c /mnt cd9660: /dev/cd1c: Device not configured # cdrecord -scanbus Cdrecord 1.11a28 (i386-unknown-freebsd4.5) Copyright (C) 1995-2002 Jörg Schilling Using libscg version 'schily-0.6' scsibus0: 0,0,0 0) * 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) 'HP ' 'CD-Writer 6020 ' '1.07' Removable CD-ROM 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * # cdrecord dev=0,4,0 vtkimage.iso Cdrecord 1.11a28 (i386-unknown-freebsd4.5) Copyright (C) 1995-2002 Jörg Schilling scsidev: '0,4,0' scsibus: 0 target: 4 lun: 0 Using libscg version 'schily-0.6' Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HP ' Identifikation : 'CD-Writer 6020 ' Revision : '1.07' Device seems to be: Philips CDD-2600. Using driver for Philips CDD-522 (philips_cdd522). Driver flags : Supported modes: TAO cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 02 80 00 00 3E 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk -2147483586 (valid) resid: 14 cmd finished after 0.005s timeout 40s cdrecord: No disk / Wrong disk! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message