Hi, I am trying to enable the builtin sound card present in Dell Dimension 8300 but cant seem to get it done. As far as I remember, in FreeBSD 5.3 it can be done simply by having the following two options in the kernel config file:
device sound device snd_ich However, FreeBSD 5.1 does not recognize any of these even (Even man sound or man snd_ich does not work even though it should work on any FreeBSD 5.* So I guess I have to give some hardware hints in order to config MYCONFIG gives the following error report: ================================================= config: Error: device "sound" is unknown config: Error: device "snd_ich" is unknown (/boot/kernel/ however has the files snd_ich.ko as well as snd_pcm.ko) The output of cat /dev/sndstat is as follows: ============================================= FreeBSD Audio Driver (newpcm) Installed devices: The 'seems to be relevant part of dmesg' is here: ================================================= pci0: <multimedia, audio> at device 31.5 (no driver attached) The entire dmesg output is as follows: ================================ <== START OF dmesg output Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #3: Tue Oct 14 18:17:28 CDT 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/NEW Preloaded elf kernel "/boot/kernel/kernel" at 0xc0700000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0700294. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 3192009524 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073168384 (1023 MB) avail memory = 1035091968 (987 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL 8300 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00feae0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 11 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 10 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 9 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 11 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfcfff000-0xfcffffff irq 10 at device 8.0 on pci2 fxp0: Ethernet address 00:07:e9:5f:67:fd miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xfebffc00-0xfebfffff irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 9 at device 31.2 on pci0 ata2: at 0xfe00 on atapci1 ata3: at 0xfe20 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROMs> at iomem 0xd1000-0xd3fff,0xc0000-0xcf7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 RTC BIOS diagnostic error 18<memory_size,fixed_disk> Timecounters tick every 10.000 msec ad4: 238418MB <WDC WD2500JD-75FYB0> [484406/16/63] at ata2-master UDMA100 acd0: CDROM <Lite-On LTN486S 48x Max> at ata1-master PIO4 Mounting root from ufs:/dev/ad4s3a <=== END OF dmesg output Thanks, Amit ---------------------------------------------------------------------- http://www.cs.rice.edu/~amsaha ---------------------------------------------------------------------- The world is coming to an end ... SAVE YOUR BUFFERS!!! ---------------------------------------------------------------------- _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"