Whether I run fsck manually or if I run it automagically at boot via rc
(which happens every reboot), it fails. As I'm not at console, I can't
tell whether the same things happen if the box is physically taken down.
and fsck'd in single user mode. The better part of the question is,
could this be the RAID card throwing out false errors due to not having
complete support for 5.3-R?, as it says that it only supports the 4.x
series.
-- Jonathan
Franco Bruno Borghesi wrote:
Your fstab is OK.
I don't exactly understand the problem. When you boot fsck will run
automatically if the system did not correctly shut down. This is done
*before* disks are mounted rw, so there's no way you will see the "(NO
WRITE)" message.
If system was not correctly shut down, fsck will run, and it *will* (and
should) slow down system boot process.
So, is it the problem that fsck is running *every* time you boot? Or is
it that you get this "(NO WRITE)" message when you run it manually?
2005/5/24, Jonathan M. Slivko <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>:
[EMAIL PROTECTED](~)% cat /etc/fstab
# Device Mountpoint FStype Options Dump
Pass#
/dev/twed0s1b
none swap sw 0 0
/dev/twed0s1a / ufs
rw 1 1
/dev/twed0s1g /home ufs rw,userquota,groupquota
2 2
/dev/twed0s1d /tmp ufs
rw 2 2
/dev/twed0s1e /usr ufs
rw 2 2
/dev/twed0s1f /var ufs
rw 2 2
/dev/acd0 /cdrom cd9660 ro,noauto
0 0
none /proc
procfs rw 0 0
[EMAIL PROTECTED](~)%
Franco Bruno Borghesi wrote:
> Could you post your /etc/fstab?
>
> 2005/5/24, Jonathan M. Slivko <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> >:
>
>>Yes, this is actually the autoboot fsck thats breaking, the one
that is
>>called from /etc/rc (via /etc/rc.d/). I can physically take the
box down
>>and do an offline fsck of it and that works fine, it's just when
it's in
>>multi-user mode thats the problem.
>>
>>-- Jonathan
>>
>>Franco Bruno Borghesi wrote:
>>
>>>For fsck to work (to actually correct any problems you may have),
>>>partitions should be umounted first. Are you sure you have umounted
>>>/dev/twedXXXX before running fsck?
>>>
>>>
>>>2005/5/24, Jonathan M. Slivko < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
>>><mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>>:
>>>
>>>Hello,
>>>
>>>I have an interesting question, I have a Pentium 4 2.4Ghz (No HT
>>>Enabled),
>>>2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc.
However,
>>>whenever you try and do an fsck -y, it says:
>>>
>>>[EMAIL PROTECTED] (~)% fsck -y
>>>** /dev/twed0s1a (NO WRITE)
>>>** Last Mounted on /
>>>** Root file system
>>>** Phase 1 - Check Blocks and Sizes
>>>** Phase 2 - Check Pathnames
>>>** Phase 3 - Check Connectivity
>>>** Phase 4 - Check Reference Counts
>>>** Phase 5 - Check Cyl groups
>>>2821 files, 31805 used, 474682 free (322 frags, 59295 blocks, 0.1%
>>>fragmentation)
>>>
>>>** /dev/twed0s1g (NO WRITE)
>>>** Last Mounted on /home
>>>** Phase 1 - Check Blocks and Sizes
>>>** Phase 2 - Check Pathnames
>>>** Phase 3 - Check Connectivity
>>>** Phase 4 - Check Reference Counts
>>>** Phase 5 - Check Cyl groups
>>>82057 files, 557735 used, 12912399 free (2343 frags, 1613757
blocks,
>>>0.0%
>>>fragmentation)
>>>
>>>** /dev/twed0s1d (NO WRITE)
>>>** Last Mounted on /tmp
>>>** Phase 1 - Check Blocks and Sizes
>>>** Phase 2 - Check Pathnames
>>>** Phase 3 - Check Connectivity
>>>** Phase 4 - Check Reference Counts
>>>** Phase 5 - Check Cyl groups
>>>30 files, 1787 used, 504700 free (20 frags, 63085 blocks, 0.0%
>>>fragmentation)
>>>
>>>** /dev/twed0s1e (NO WRITE)
>>>** Last Mounted on /usr
>>>** Phase 1 - Check Blocks and Sizes
>>>** Phase 2 - Check Pathnames
>>>** Phase 3 - Check Connectivity
>>>** Phase 4 - Check Reference Counts
>>>** Phase 5 - Check Cyl groups
>>>251160 files, 1318908 used, 13912410 free (73346 frags, 1729883
blocks,
>>>0.5% fragmentation)
>>>
>>>** /dev/twed0s1f (NO WRITE)
>>>** Last Mounted on /var
>>>** Phase 1 - Check Blocks and Sizes
>>>** Phase 2 - Check Pathnames
>>>** Phase 3 - Check Connectivity
>>>** Phase 4 - Check Reference Counts
>>>** Phase 5 - Check Cyl groups
>>>4424 files, 63321 used, 7042830 free (2462 frags, 880046 blocks,
0.0%
>>>fragmentation)
>>>
>>>The drives are Seagate SATA's (7200RPM) with a 3Ware SATA RAID
>>>Controller
>>>(8006-2LP) using the twe kernel driver. The drives themselves
allow data
>>>to be read to/written from them, but fsck will not work (and is
hanging
>>>things on boot).
>>>
>>>Anyone got any ideas? I looked at www.3ware.com
<http://www.3ware.com> <http://www.3ware.com>
>>><http://www.3ware.com> earlier and it says that
>>>the 8006-2LP's support FreeBSD 4.x , but not 5.x - could this be
a result
>>>of that, seeing as otherwise the drives/RAID work fine (AFAIK,
it could
>>>not be and I'm just not sure how to test it).
>>>
>>>TIA,
>>>-- Jonathan
>>>_______________________________________________
>>>freebsd-questions@freebsd.org
<mailto:freebsd-questions@freebsd.org> <mailto:
freebsd-questions@freebsd.org <mailto:freebsd-questions@freebsd.org>>
>>>mailing list
>>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>To unsubscribe, send any mail to "
>>>[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
>>><mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>"
>>>
>>>
>>
>>--
>>Jonathan M. Slivko - [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
>>"Linux: The Choice for the GNU Generation"
>>- http://www.linux.org/ -
>>
>>Don't fear the penguin.
>>.^.
>>/V\
>>/( )\
>>^^-^^
>>He's here to help.
>>
>
> _______________________________________________
> freebsd-questions@freebsd.org
<mailto:freebsd-questions@freebsd.org> mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>"
--
Jonathan M. Slivko - [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
"Linux: The Choice for the GNU Generation"
- http://www.linux.org/ <http://www.linux.org/> -
Don't fear the penguin.
.^.
/V\
/( )\
^^-^^
He's here to help.
--
Jonathan M. Slivko - [EMAIL PROTECTED]
"Linux: The Choice for the GNU Generation"
- http://www.linux.org/ -
Don't fear the penguin.
.^.
/V\
/( )\
^^-^^
He's here to help.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
