On Friday 10 June 2005 10:10 pm, Bob Johnson wrote: > I need to find a PCI FireWire card that will work with FreeBSD 5.4-RELEASE. > It will be easiest for me to purchase something from Best Buy, which pretty > much limits me to either a Dynex DX-FC103, or an Adaptec AFW-4300CS. >
I've received no replies on this, but after some digging I found some additional information. > The Dynex card uses an Agere FW323-06 Firewire chip, which is not listed as > supported by the fwohci driver. I can't tell what chipset the Adaptec card > uses: it has an Adaptec paper label on it. Agere used to be the Lucent Microelectronics division, so I assume the Agere FW323-06 is the essentially the same thing as the Lucent FW323, which is listed as supported by the fwohci driver. Perhaps tomorrow I'll remember to submit a PR suggesting that the hardware list be updated to reflect the name change, but tonight I need to get some sleep. I also found a posting on freebsd-firewire that said the "Adaptec FireConnect 4300" works with FreeBSD. > > Can anyone tell me if either of these cards will work with 5.4-RELEASE, or > recommend another inexpensive PCI Firewire card? > It sounds like either of these will probably work with FreeBSD 5.4. - Bob _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"