Hello all, I'm darned if I know what is going on with this -- I've installed many version 4.X and 5.X systems on Proliant hardware but this is the first failure (and the first Proliant 6000) --
Presario 6000 dual processor Smart Raid 3100ES attached to 4 - 18 Gb 10,000 RPM UW SCSI drives. Configured as one RAID 0 array containing one physical = one logical drive and one RAID 5 array containing three physical = one logical drive. Compaq utilities report no problem with any of this, and the system is up to date with firmware. System set up for a SCO Unix 7.1 install. As I don't really know how to export the boot messages, I can tell you it fails at a line that appears maybe a dozen lines after the md0: Preload image line: GEOM: Configure idad0s3 start 16384 length 37584896 end 37601279 So apparently FBSD is having some problems either with the controller or possibly the drives themselves...? I've googled and searched the web to no avail. Older versions of FBSD did not have the ida code, but 5.4 surely does...your help, as always, is most appreciated. Thank you, Roy __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"