Looking at the port makefile, one of the programs that is installed is
called cdrw_format. Maybe you should try that.
Roland
Looks like it is the right program. But it does not work. I have
ide-scsi emulation enabled on my CDRW drive, so it is named /dev/cd0. I
have a blank disc in the drive (created with "cdrecord speed=4 -v
blank=fast").
Here are the results:
earth# cdrw_format -D -F /dev/cd0
Opening device /dev/cd0
Device dentifies itself as : SCSI busnum = 0, target = 0, lun = 0
CD-RW has a capacity of 359847 blocks (736966656 bytes)
Formatting.... (please be patient (+/- 10 minutes)) ...SCSI command
error on /dev/cd0: Status=0x8c
Sense data: Key=0x0 () Code=0x0 Qual=0x0
format unit returned : Bad address
fail
Formatting failed because of : Bad address
Disc access statistics
sector reads 0 (0 Kbyte)
sector written 0 (0 Kbyte)
switches 0
earth#
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
