Thanks John,
What you are saying make perfect sense based on what I've had to do in the
past. Just to clarify ...
Lets say I have 5 machines (which I do)
And lets say I have 10 blocks of IP address from my upline (which I do)
1.1.1.1/24
2.2.2.2/24
3.3.3.3/24
4.4.4.4/24
...
And, lets say that I need to set up various IPs, from each of the groups
above, on all 5 of the servers.
To keep the explanation easy to follow, I will put what I might have in
rc.conf for each machine, Leaving out the gateway IPs as they are not
realevent to the question...my router setting work fine.
Sever 1:
hostname="machine1.mydomain.com"
defaultrouter="some ip here"
ifconfig_em0="inet 1.1.1.2 netmask 255.255.255.0"
ifconfig_em0_alias0="inet 1.1.1.3 netmask 255.255.255.255"
ifconfig_em0_alias1="inet 1.1.1.4 netmask 255.255.255.255"
...
ifconfig_em0_alias2="inet 2.2.2.3 netmask 255.255.255.0"
ifconfig_em0_alias3="inet 2.2.2.4 netmask 255.255.255.255"
ifconfig_em0_alias4="inet 2.2.2.5 netmask 255.255.255.255"
...
ifconfig_em0_alias5="inet 3.3.3.4 netmask 255.255.255.0"
ifconfig_em0_alias6="inet 3.3.3.5 netmask 255.255.255.255"
ifconfig_em0_alias7="inet 3.3.3.6 netmask 255.255.255.255"
...
Sever 2:
hostname="machine2.mydomain.com"
defaultrouter="some ip here"
ifconfig_em0="inet 1.1.1.5 netmask 255.255.255.0"
ifconfig_em0_alias0="inet 1.1.1.6 netmask 255.255.255.255"
ifconfig_em0_alias1="inet 1.1.1.7 netmask 255.255.255.255"
...
ifconfig_em0_alias2="inet 2.2.2.6 netmask 255.255.255.0"
ifconfig_em0_alias3="inet 2.2.2.7 netmask 255.255.255.255"
ifconfig_em0_alias4="inet 2.2.2.8 netmask 255.255.255.255"
...
ifconfig_em0_alias5="inet 3.3.3.7 netmask 255.255.255.0"
ifconfig_em0_alias6="inet 3.3.3.8 netmask 255.255.255.255"
ifconfig_em0_alias7="inet 3.3.3.9 netmask 255.255.255.255"
...
Sever 2:
hostname="machine3.mydomain.com"
defaultrouter="some ip here"
ifconfig_em0="inet 1.1.1.8 netmask 255.255.255.0"
ifconfig_em0_alias0="inet 1.1.1.9 netmask 255.255.255.255"
ifconfig_em0_alias1="inet 1.1.1.10 netmask 255.255.255.255"
...
ifconfig_em0_alias2="inet 2.2.2.9 netmask 255.255.255.0"
ifconfig_em0_alias3="inet 2.2.2.10 netmask 255.255.255.255"
ifconfig_em0_alias4="inet 2.2.2.11 netmask 255.255.255.255"
...
ifconfig_em0_alias5="inet 3.3.3.10 netmask 255.255.255.0"
ifconfig_em0_alias6="inet 3.3.3.11 netmask 255.255.255.255"
ifconfig_em0_alias7="inet 3.3.3.12 netmask 255.255.255.255"
...
Server 3, 4 and 5 similar with repeating patterns.
So the original question was: When setting up an IP from any given block,
do, or should I, need to use the real netmask that my ISP has assinged me
(for the first), then, the single host (255) netmask for each of the rest
(Again, from a specific IP block?
I hope it is because I have hundreds of IPs set up that way.
The reason I ask this question (again) is because I have one IP that does
not want to work using the above paradigm. That is to say, that it IS the
only IP from a specific block, on a particular machine, and it won't take
using the real netmask, it will only work using the 255 netmask.
Sincerly,
-Confused
(Grant).
----- Original Message -----
From: "John Oxley" <[EMAIL PROTECTED]>
To: "Grant Peel" <[EMAIL PROTECTED]>
Cc: <freebsd-questions@freebsd.org>
Sent: Thursday, September 15, 2005 7:55 AM
Subject: Re: IPs , Netmasks and Broadcast.
On Wed, Sep 14, 2005 at 12:00:12PM -0400, Grant Peel wrote:
Now I am really confused.
First of all install ipcalc NOW.
Up until this morning I thought I had a good handle on when I need to use
the real Netmask and Broadcast.
For example, If I have 3 servers, and my upline asigns me a block of 128
addresses, for the first ip used (from this block) on each server, I
would
need to specify the IP, true netmask and a broadcase. Then, when using
more
IPs from that block, I would use a 255.255.255.255 netmask and a
broadcast
equal to the IP.
No, a 255.255.255.255 netmask specifies a single host. If your ISP has
given you 128 IPs, that is a /25 or netmask 255.255.255.128 as shown :
[EMAIL PROTECTED]:~$ ipcalc 192.168.254.0/25
Address: 192.168.254.0 11000000.10101000.11111110.0 0000000
Netmask: 255.255.255.128 = 25 11111111.11111111.11111111.1 0000000
Wildcard: 0.0.0.127 00000000.00000000.00000000.0 1111111
=>
Network: 192.168.254.0/25 11000000.10101000.11111110.0 0000000
HostMin: 192.168.254.1 11000000.10101000.11111110.0 0000001
HostMax: 192.168.254.126 11000000.10101000.11111110.0 1111110
Broadcast: 192.168.254.127 11000000.10101000.11111110.0 1111111
Hosts/Net: 126 Class C, Private Internet
So all your machines would have the same network and broadcast, and you
would make them all use your gateway box as the default route.
As you can see, a 255.255.255.255 netmask (/32) is only one host:
[EMAIL PROTECTED]:~$ ipcalc 192.168.254.34/32
Address: 192.168.254.34 11000000.10101000.11111110.00100010
Netmask: 255.255.255.255 = 32 11111111.11111111.11111111.11111111
Wildcard: 0.0.0.0 00000000.00000000.00000000.00000000
=>
Hostroute: 192.168.254.34 11000000.10101000.11111110.00100010
Hosts/Net: 1 Class C, Private Internet
What you need to do is use IP calc to see what the network and broadcast
are and set those, although on FreeBSD 4.X (I think anyway, someone
correct me if I am wrong) you can just put in your /etc/rc.conf
ifconfig_bge0="inet 192.168.254.32/25"
or
ifconfig_bge0="inet 192.168.254.32 netmask 255.255.255.128"
And FreeBSD will work out the network and broadcast for you.
Today, I was in this exact position where I was tring to add an (the
first
one one THAT machine, from that block) IP from a block that is almost
completely used up on another server, and the one I was adding it to
would
not take it. When I tried adding it with a 255.255.255.255 netmask, and a
broadcast eaqual to the amount of IPs from that block - it worked.
Like I said before, there is only 1 IP in a /32 block, and the broadcast
will be either a.b.c.127 or a.b.c.255 depending whether you have the
first or second subnet inside that class C.
Hope this helps
-John
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
