On Tuesday 15 November 2005 13:43, Steve Bertrand wrote:
> I'm a wee bit confused here, but I do understand what you are trying to
> do.
>
> First, did you compile a new kernel with the following option?:
>
> options BRIDGE
>
> Second, try giving both PC's a static IP address, and disconnect the
> FBSD box entirely from the network (so you essentially have a 2 pc
> network), then commence testing.
>
> HTH,
>
> Steve
Steve
Thanks for the reply
I didn't recompile a kernel specifically for this. I thought the bridge was a
KLD (/boot/kernel/if_bridge.ko)? ifconfig shows the bridge as running.
[EMAIL PROTECTED] ifconfig
rl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::2e0:4cff:fe77:27f0%rl0 prefixlen 64 scopeid 0x2
inet 192.168.0.181 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:e0:4c:77:27:f0
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
rl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::2e0:4cff:fe12:a7d9%rl1 prefixlen 64 scopeid 0x3
ether 00:e0:4c:12:a7:d9
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
bridge0: flags=8041<UP,RUNNING,MULTICAST> mtu 1500
ether ac:de:48:01:fb:93
priority 32768 hellotime 2 fwddelay 15 maxage 20
member: rl1 flags=3<LEARNING,DISCOVER>
member: rl0 flags=3<LEARNING,DISCOVER>
Here is my setup:
bridge0
/ \
_________ | |
/ \ rl0 \+-----+/rl1 +----+
{ NETWORK }---------|alfie|---------|fred|
\_________/ +-----+ +----+
FreeBSD Win2k
So if I disconnect alfie, fred will lose connectivity too.
Hopefully this clears up what I meant...
regards
Ashley
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
