>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Miguel
>Sent: Tuesday, November 22, 2005 7:11 AM
>To: Ted Mittelstaedt
>Cc: FreeBSD Questions
>Subject: Re: HP DL380 hangs on boot
>
>
>Ted Mittelstaedt wrote:
>
>>If you are convinced it's the CD corrupting the
>>install, then boot from a floppy and do a FTP install
>>and see what happens.
>>
>>Ted
>>  
>>
>That is exactly what i did, the install finished without any problem, 
>but i still cant use the cdrom drive, no matters what cd is in the 
>drive, i always get this error when transfering from the cd to the hd:
>
>acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
>g_vfs_done():acd0[READ(offset=446623744, length=65536)]error = 5
>acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
>g_vfs_done():acd0[READ(offset=446627840, length=65536)]error = 5
>acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
>g_vfs_done():acd0[READ(offset=446631936, length=65536)]error = 5
>acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
>g_vfs_done():acd0[READ(offset=446636032, length=65536)]error = 5
>acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
>g_vfs_done():acd0[READ(offset=446636032, length=4096)]error = 5
>acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 error=0
>

Your going to have to send-pr it then.  Make sure you state in
the PR that the FreeBSD system has booted fine and is running
fine except for access to the CDROM drive, and make sure you 
state that you have tried several different CDROM readers in
the hardware.

The older Compaq deskpro's with onboard Adaptec SCSI controllers
(pentium pro 200 dual processor systems) had exactly the same
problem.  Replacing the IDE cdrom with a SCSI one worked.

Ted
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to