i have 4.11-RELEASE-p13 on smp machine i've tested it with memtest and cpuburn for a day but with site with simple perl scripts it crashes every hour with errors:
Nov 23 14:27:44 /kernel: panic: lockmgr: non-zero exclusive count Nov 23 14:33:27 /kernel: panic: pmap_release: non ptd page Nov 23 21:19:14 /kernel: panic: vm_page_free: freeing free page Nov 23 23:43:23 /kernel: panic: lockmgr: pid 43952, not exclusive lock holder -1 unlocking Nov 24 01:09:10 /kernel: panic: vm_page_remove(): page not found in hash i changed the memory but it didn't help tell me please -- is it problem with hadrware or i have to upgrade to 5 or 6 release or smth? thanks here is my dmesg: vm_page_free: pindex(67), busy(0), PG_BUSY(1), hold(0) panic: vm_page_free: freeing free page mp_lock = 01000001; cpuid = 1; lapic.id = 01000000 boot() called on cpu#1 syncing disks... 70 1 1 1 1 1 1 1 5 system full cpu_reset_proxy: Grabbed mp lock for BSP cpu_reset_proxy: Stopped CPU 1 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.11-RELEASE-p13 #1: Fri Nov 18 13:23:58 MSK 2005 [EMAIL PROTECTED]:/usr/src/sys/compile/KU Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 3.06GHz (1600.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 1073676288 (1048512K bytes) avail memory = 1041809408 (1017392K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 7, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: 8, version: 0x00178020, at 0xfec82000 io2 (APIC): apic id: 9, version: 0x00178020, at 0xfec82400 Preloaded elf kernel "kernel" at 0xc0308000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 12 entries at 0xc00f7980 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 9 IOAPIC #0 intpin 18 -> irq 10 IOAPIC #0 intpin 17 -> irq 11 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=2547)> at device 4.0 on pci0 pci2: <PCI bus> on pcib1 pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2 IOAPIC #2 intpin 0 -> irq 16 IOAPIC #2 intpin 1 -> irq 17 pci4: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.42> port 0xb800-0xb83f mem 0xefdc0000-0xefddffff irq 16 at device 2.0 on pci4 em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.42> port 0xbc00-0xbc3f mem 0xefde0000-0xefdfffff irq 17 at device 3.0 on pci4 em1: Speed:N/A Duplex:N/A pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2 IOAPIC #1 intpin 2 -> irq 18 IOAPIC #1 intpin 3 -> irq 19 pci3: <PCI bus> on pcib3 ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xac00-0xacff mem 0xefcff000-0xefcfffff irq 18 at device 6.0 on pci3 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xa800-0xa8ff mem 0xefcfe000-0xefcfefff irq 19 at device 6.1 on pci3 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pci0: <UHCI USB controller> at 29.0 irq 2 pci0: <UHCI USB controller> at 29.1 irq 9 pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib4 pci1: <ATI Mach64-GR graphics accelerator> at 9.0 irq 10 isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0xff00-0xff0f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 11 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xcd800-0xcefff,0xcf000-0xd07ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, unlimited logging SMP: AP CPU #1 Launched! acd0: MODE_SENSE_BIG command timeout - resetting ata0: resetting devices .. done acd0: DVD-ROM <Slimtype DVD-ROM LSD-081> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 1 lun 0 da0: <SEAGATE ST336807LC 0C01> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) WARNING: / was not properly dismounted em0: Link is up 100 Mbps Full Duplex panic: lockmgr: pid 43952, not exclusive lock holder -1 unlocking mp_lock = 00000001; cpuid = 0; lapic.id = 00000000 boot() called on cpu#0 syncing disks... 72 1 done Uptime: 2h23m0s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... cpu_reset called on cpu#0 cpu_reset: Stopping other CPUs panic: vm_page_remove(): page not found in hash mp_lock = 00000001; cpuid = 0; lapic.id = 00000000 boot() called on cpu#0 syncing disks... 70 1 1 1 1 1 1 1 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 giving up on 1 buffers Uptime: 1h24m33s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... cpu_reset called on cpu#0 cpu_reset: Stopping other CPUs -- Evgenii V Davidov _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"