On Thu, 24 Nov 2005 15:28:54 +0100 Freminlins <[EMAIL PROTECTED]> wrote:
> Hello, > > I have a dual amd64 machine on which serial console is not working > properly. I've configured dozens of Intel machines without a problem. > > I have set up boot.config and /etc/ttys. If I boot the machine some > data is printed to console. Rather than paste the whole lot here, > here's the last few lines: > > Timecounters tick every 1.000 msec > ad0: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-master UDMA133 > ad1: 78167MB <Maxtor 6Y080L0 YAR41BW0> at ata0-slave UDMA133 > acd0: CDROM <SR244W/T01A> at ata1-master UDMA33 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad0s1a > bge0: link state changed to DOWN > bge1: link state changed to DOWN > > And that's it. Serial console is frozen, but the machine boots up and runs > fine. > > Any suggestions? > > Thanks, > Frem. has this ever worked? If its a new box could be a hardware prob could try a loop-back test if you have the wrap plugs Arden > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"