after alot of time spent in this problem, I still have no solution to this and no help yet, is there nobody using IBM Blade and FreeBSD? I've used FreeBSD since 1994 and never had a problem like this..... but, I tried to boot from Gentoo Linux, and it detects everything fine with all lun's useable without any apparent problem is FreeBSD not going to support IBM Blade? it seems that I'm forced to stop using FreeBSD for Linux.... I'm not happy. kveðja/regards Gestur
________________________________ From: Gestur A. Grjetarsson Sent: 6. desember 2005 12:18 To: '[EMAIL PROTECTED]'; 'freebsd-questions@freebsd.org' Subject: FW: problems booting FreeBSD 6.0 on IBM Blade Center H40 hi I have an update to my problem with booting FreeBSD 6.0 on IBM Blade H40 I set the execution throttle to 256 from 255 and set Hard id to 5 from 125 by doing this, I get the ISP driver working and no delay when the driver boots => but when the system comes into sysinstall menu, I get no disks, it seems that the system doesn't see any drives or lun's ,,, what is causing this?? please help me with this anyone! kveðja/ best regards Gestur ________________________________ From: Gestur A. Grjetarsson Sent: 6. desember 2005 10:57 To: '[EMAIL PROTECTED]' Subject: FW: problems booting FreeBSD 6.0 on IBM Blade Center H40 Hi I have this new IBM Blade Center, which I would like to run FreeBSD on with boot from SAN, when trying to boot I get problems and can't see any disks from the SAN. the configuration I have is a IBM Blade Center H40 DS400 diskbox with dual controller but only single connection Qlogic 2312 dual FC controller I have problem with the ISP driver: I tried to boot from the FreeBSD 6.0-Release cd but it always fails with the error can't load kernel and I can't see the cdrom to boot from after the boot loader has started. So I downloaded the boot floppies and tried to boot the blade using the floppies but it won't show me any drivers after a long waiting period while the isp driver hangs for awile in the boot process. I compiled a custom kernel and made new boot kern floppies to boot from, and now I'm stuck with this error in the boot process: isp0: bad execution throttle of 0- using 16 isp0: bad hard address 125- resetting to zero after reading all i've gathered on this subject and googl'd on it, I put ispfw_load="YES" line in the loader.conf ,, but without result Can anyone point me out on how to solve this problem, I really need this to work !?!? please help! kveðja/regards Gestur _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
