>
> Tuc at T-B-O-H <[EMAIL PROTECTED]> writes:
>
> > Hi,
> >
> > I was trying to upgrade from 4.X to 5.4 and I bricked my laptop...
> >
> > When it boots, the last thing I see is :
> >
> > atapci0: <Intel PIIX4 UDMA33 controller> port
> > 0x376,0x170-0x177,0x3f6,0x1f0-0x1f
> > 7 at device 5.1 on pci0
> > atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
> > ata0: channel #0 on atapci0
> > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> > ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> > ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
> > ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
> > ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> > ata0: [MPSAFE]
> > ata1: channel #1 on atapci0
> > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> >
> >
> > I tried doing a safe boot, EISA setting off, etc.. No luck. HELP!
>
> Try setting ATAPI DMA off?
>
If I understand correctly, thats part of the "Safe boot" (I got
the beastie to come up after making a change) and it didn't help.
Thanks, Tuc
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
