On 1/2/06, Nikolas Britton <[EMAIL PROTECTED]> wrote: > On 12/24/05, Philip Lykke Carlsen <[EMAIL PROTECTED]> wrote: > > I have this external harddisk kit, and when I plug it in, the system > > correctly > > recognizes it as a umass.. but afterwards, the da device is never created.. > > > > this is what I get from the console: > > > > umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 > > umass0: BBB reset failed, TIMEOUT > > umass0: BBB bulk-in clear stall failed, TIMEOUT > > > > Also, the very same thing but the timeouts are happening if I connect an > > Apple > > iPod.. > > > > And for the record, I had this problem with both the generic and my custom > > kernel.. both with umass,da,ses,pass compiled in.. > > > > Any ideas as for how to solve this? > > Any guidelines and I'd gladly edit the files in question and submit a patch, > > when I get it working.. > > > > PS, Any other usb-drive I've tried has worked without problems.. > > I was having a similar problem with my new ipod... it would stall here: > umass0: Apple iPod, rev 2.00/0.01, addr 2 > > After two hours of frustration (pissed off) I decided to repeatedly > unplugged and re-plug the device cable in... To my surprise it started > working!!! > > umass0: Apple iPod, rev 2.00/0.01, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Apple iPod 1.62> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > > The trick is to rapidly (without being careless) unplug / replug the > device in 2 or 3 times... My mainboard is an Intel 845GBV with ICH4, > USB settings in BIOS are set to defaults. > > uname -a: > FreeBSD spectra.intranet 6.0-RELEASE-p1 FreeBSD 6.0-RELEASE-p1 #2: Mon > Jan 2 22:26:01 CST 2006 > [EMAIL PROTECTED]:/usr/src/sys/i386/compile/Info-Matic i386 > > Kernel config file: > # > # Info-Matic -- Generic kernel configuration file for FreeBSD/i386 Info-Matic > # Appends system specific options to the generic kernel > # > > include GENERIC > > ident Info-Matic > > # System Management Bus > device smb > device smbus > device ichsmb > > # Sound Support > device sound # PCM audio device infrastructure > device "snd_emu10k1" # SoundBlaster Live! and Audigy PCI bridge > devic > > # Video Support > device "radeondrm" # ATI Radeon Direct Rendering Module > device drm # Direct Rendering Module > options VESA # Full VESA BIOS support > options SC_PIXEL_MODE # Console raster text mode (VESA graphic > modes) >
One more thing. It's highly likey that your system will hang when you disconnect the ipod... prep your system for the worst, a warm reboot. Also don't connect the ipod untill you have X running. Connecting the ipod and then running KDE will hang the system. Start KDE and then ALT + CTRL + F1 to get to the console and then connect it... jump back to X (ALT + F9) to mount the drive "mount_msdosfs /dev/da0s2 /mnt/ipod" and then everything should be good to go for amaroK to use it. I use umount and "camcontrol eject da0" before I unplug it, but it still seems to hang the system. Oh.. and it's not as "rapid" as I said before. Connect the ipod then disconnect it... wait for error(s) then reconnect it. rinse and repeat until you get device da0... It's all about your timing.... Is their something wrong in the FreeBSD code? Anyways. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
