Tom Grove wrote:
Over the past few months I have noticed that our mail server is flat out
locking up. I monitor it via Nagios and about once every two months I
get emails saying it is down and when I go over to the console the
server is totally unresponsive. I've gone through logs every time and
find nothing at all wrong.
This is a Dell PowerEdge 2850 with Dual Xeon cpu's and 2GB of memory.
Uname replies with:
FreeBSD colossus 4.11-RELEASE-p13 FreeBSD 4.11-RELEASE-p13 #0: Fri Oct
14 13:34:01 EDT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/COLOSSUS i386
One, has anyone else had similar problems with boxes just becoming
unresponsive under high load? Two, is there any reason this would occur?
-Tom Grove
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
I have very recently (a couple of weeks a go) had my small home server
start randomly deciding to lock up, not even under heavy load. It would
just decide to freeze up for no reason. It would happen usually at least
once a week, and it was fairly common for it to lock up during the O/S
boot. It would never lock up in BIOS though.
After replacing every single piece of hardware in the machine, aside
from the motherboard, nothing seemed to help. Upon further inspection of
the motherboard, just before looking to buy a new one, I noticed bulging
/ leaking capacitors around the CPU socket. It looked like *all* of the
most important caps were knackered. I am suprised it managed to turn on
and stay up (for a while) at all.
Just the other day I ordered some good brand name caps (Rubycon MCZ's)
and replaced all but 3 of the original capacitors on the board. It's
been up for 11 days with no signs of locking up. Before leaving it on
again I tested it out, just by restarting a fair few times, to see if it
continued to lock up during O/S boot. Not *once* did it lock up after
the capacitor replacement jobby I did. It appears to have solved all my
instability problems!
It may be a long shot, but it's perhaps worth perhaps checking the
capacitors and making sure they're in good condition. Even a slight
bulge is the sign of a failing capacitor, as far as I am aware. The tops
should be *perfectly* flat, and nice and shiny :-) Of course, you may
not be comfortable taking a soldering iron to your board. If you do
discover bad caps and would like to have them replaced by someone with
experience, take a look at www.badcaps.net. They offer a paid service
for capacitor replacement. Not exactly certified by any motherboard
manufacturers or anything, but appears to have a lot of experience.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
