Hi, i have freebsd 6.0 in a dl380 g3, im copying a 3.0G file from one
server (with gentoo) to the freebsd server using scp, the transfer rate
is terrible slow, check out this
napstats# scp [EMAIL PROTECTED]:NAPSTATS_TRANSFER/stopacct_borrar
stopacct_borrar
stopacct_borrar 26% 802MB
423.2KB/s 1:30:57 ETA
this are my interfaces:
napstats# ifconfig -a
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1a<TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet6 fe80::213:72ff:fe0c:9065%bge0 prefixlen 64 scopeid 0x1
inet 192.168.10.49 netmask 0xfffff000 broadcast 192.168.15.255
ether 00:13:72:0c:90:65
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
tl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:08:c7:56:ce:3e
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
i dont have any errors:
napstats# netstat -i
Name Mtu Network Address Ipkts Ierrs Opkts
Oerrs Coll
bge0 1500 <Link#1> 00:13:72:0c:90:65 1574833 0 994478
0 0
bge0 1500 fe80:1::213:7 fe80:1::213:72ff: 0 - 4
- -
bge0 1500 192.168.0/20 192.168.10.49 1335972 - 991596
- -
tl0* 1500 <Link#2> 00:08:c7:56:ce:3e 0 0 0
0 0
lo0 16384 <Link#3> 12620 0 12620
0 0
lo0 16384 localhost ::1 12476 - 12476
- -
lo0 16384 fe80:3::1 fe80:3::1 0 - 0
- -
lo0 16384 your-net localhost 144 - 144
- -
what can be wrong?
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
