While working on a FreeBSD modification, during compiling it, the system hung completely. It was actually during the 'make install' stage, make had finished by this point. I had just added 'device atapicam' to my config file also (i doubt that's relevant tho?).
Upon reboot, none of my back-up kernels now boot. When I boot the half compiled kernel I get: ------------------------- When loading required module 'pci' int = 000 .... err = 0.... efl = 000.... [etc...] BTX Halted. ------------------------- When trying to boot my back up kernels, I get this error straight away: -------------------------- Fatal Trap 18: integer divide fault while in kernel mode. intruction pointer = 0x20 : 0xc064f37a stack pointer = 0x28 : 0xc0c20c84 frame pointer = 0x28 : 0xc0c20c94 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL, pres1, def32 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0() [thread pid 0 tid 0] Stopped at link_elf_lookup_symbol+0x16: divl 0x54 (%ebx), % eax db> trace Tracing pid 0 tid 0 td 0xc09322c0 link_elf_lookup_symbol(c2275c00, c2255a60, c0c20cc0, c2255a60, 1c) at link_elf_lookup_symbol 0x56 link_elf_lookup_set(c2275c00, c0874da6, c0c20d4c, c0c20d50,0) at link_elf_lookup_set+0x56 link_file_lookup_set(c2275c00, c0874da6, c0c20d4c, c0c20d50,0) at link_file_lookup_set+0x54 linker_preload(0, c1ec00, c1e000,0,c0445255) at linker_preload + 0c1c3 mi_startup() at mi-startup + 0x96 begin() at begin +0x2c db> -------------------------- I'd greatly appreciate if anyone can tell me if I can recover from this problem or if it's completely lost. Thanks in advance, Paul _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"