Yes, I checked for tty, cua and ucom devices. none of which are present. I rechecked the dmesg and here is the full kernel message when i attache the modem
ucom0: OMRON OMRON ME5614U2 DATA FAX MODEM, rev 1.10/1.00, addr 2, iclass 2/2 ucom0: data interface 1, has CM over data, has break ucom0: Could not find data bulk in device_attach: ucom0 attach returned 6 Here is what shows up when I do a usbdevs -v addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, power 260 mA, config 1, OMRON ME5614U2 DATA FAX MODEM(0x0049), OMRON(0x0590), rev 1.00 port 2 powered Controller /dev/usb2: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered Any suggestions would be appreciated. TIA, Tomoki On 18 Apr 2006 10:20:21 -0400, Lowell Gilbert < [EMAIL PROTECTED]> wrote: > > "FreeBSD MailingLists" <[EMAIL PROTECTED]> writes: > > > I purchased a usb modem recently and connected it to my FreeBSD box to > see > > if it is compatible. > > I have recompiled my kernel with > > device ucom > > device umodem > > > > When I connect the modem I get the following kernel message. > > > > ucom0: OMRON OMRON ME5614U2 DATA FAX MODEM, rev 1.10/1.00, addr 2, > iclass > > 2/2 > > ucom0: data interface 1, has CM over data, has break > > ucom0: Could not find data bulk in > > > > Is there anyway to get this modem working with FreeBSD? > > Do you know it isn't? > Have you checked whether it created any terminal devices? > [I've forgotten exactly what the tty-like device name is.] > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"