Okay - I added a couple more things to my kernel config file - but for all I know they have nothing to do with getting what I want. From what I've read, this is just supposed to work. I feel like I'm taking shots in the dark trying different kernel configs, etc.
I did read the firewire/00README file - but given my level of knowledge with kernel source and modules it didn't really help much. I assumed that everything was done when I did a build/installworld to 4.7 stable. I have tried the two methods that I thought would work... first was the complete build/installworld. When that didn't work I did what the firewire/00README file stated, downloaded the latest firewire tarball and made it manually. Neither worked. I'm still getting 'Device not configured' when I try and mount /dev/da0s1. Here is my dmesg from boot -v Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #4: Fri Jan 3 16:41:59 EST 2003 [EMAIL PROTECTED]:/usr/src/sys/compile/GUTROT Calibrating clock(s) ... TSC clock: 400872843 Hz, i8254 clock: 1193074 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 402640896 (393204K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00401000 - 0x17ff4fff, 398409728 bytes (97268 pages) avail memory = 387559424 (378476K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f9ce0 bios32: Entry = 0xf0520 (c00f0520) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x720 pnpbios: Found PnP BIOS data at 0xc00fd110 pnpbios: Entry = f0000:d140 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f7f20 Preloaded elf kernel "kernel" at 0xc03da000. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) Using $PIR table, 6 entries at 0xc00f0d10 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e4000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d800, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000e800, size 4 found-> vendor=0x10b7, dev=0x9055, revid=0x30 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000d000, size 7 map[14]: type 1, range 32, base df800000, size 7 found-> vendor=0x121a, dev=0x0001, revid=0x02 class=04-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e1000000, size 24 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x102b, dev=0x0521, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e3000000, size 24 map[14]: type 1, range 32, base e0800000, size 14 map[18]: type 1, range 32, base e0000000, size 23 pci1: <PCI bus> on pcib1 pci1: <Matrox MGA G200 AGP graphics accelerator> (vendor=0x102b, dev=0x0521) at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=03 ostat0=50 ostat2=50 ata0-slave: ATAPI 00 00 ata0-master: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 14 eb ata1: mask=03 stat0=00 stat1=10 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdf800000-0xdf80007f irq 5 at device 11.0 on pci0 xl0: Ethernet address: 00:10:5a:6a:4e:74 xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached pci0: <3Dfx Voodoo graphics accelerator> (vendor=0x121a, dev=0x0001) at 12.0 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 CTL0043: start dependant CTL0043: adding irq mask 0x20 CTL0043: adding dma mask 0x2 CTL0043: adding dma mask 0x8 CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10 CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: end dependant CTL7005: start dependant CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1 CTL7005: start dependant CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1 CTL7005: end dependant isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x441 0x451 0x441 0x441 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x441 0x449 0x441 0x441 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 sbc0: setting card to irq 10, drq 0, 1 pcm0: <SB16 DSP 4.16 (ViBRA16X)> on sbc0 pcm0: sndbuf_setmap 4000, 1000; 0xd15b6000 -> 4000 pcm0: sndbuf_setmap 5000, 1000; 0xd15b7000 -> 5000 unknown: <Game> failed to probe at port 0x201 on isa0 BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ad0: success setting UDMA2 on Intel chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <Maxtor 5T030H3/TAH71DP0> ATA-6 disk at ata0-master ad0: 29311MB (60030432 sectors), 59554 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA2 on Intel chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <QUANTUM FIREBALL CX10.2A/A3F.0B00> ATA-4 disk at ata0-slave ad1: 9787MB (20044080 sectors), 19885 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA33 ad1: piomode=4 dmamode=2 udmamode=4 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA CD-ROM XM-6402B/1008> CDROM drive at ata1 as master acd0: read 5512KB/s (3271KB/s), 256KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1-slave: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-slave: success setting PIO4 on generic chip acd1: <CRW6206A/1.2A> CD-RW drive at ata1 as slave acd1: read 344KB/s (8753KB/s) write 344KB/s (344KB/s), 384KB buffer, PIO4 acd1: Reads: CD-R, CD-RW, CD-DA stream, packet acd1: Writes: CD-R, CD-RW, test write acd1: Audio: play, 128 volume levels acd1: Mechanism: ejectable tray, unlocked, lock protected acd1: Medium: no/blank disc (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB sks:c0,1 (probe3:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe3:ata1:0:1:0): NOT READY csi:0,0,13,4b asc:3a,0 (probe3:ata1:0:1:0): Medium not present (probe2:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe2:ata1:0:0:0): NOT READY asc:3a,0 (probe2:ata1:0:0:0): Medium not present (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB sks:c0,1 Creating DISK cd0 Creating DISK cd1 pass0 at ata1 bus 0 target 0 lun 0 pass0: <TOSHIBA CD-ROM XM-6402B 1008> Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers pass1 at ata1 bus 0 target 1 lun 0 pass1: <ATAPI CD-R/RW CRW6206A 1.2A> Removable CD-ROM SCSI-0 device pass1: Serial Number \^_ pass1: 16.000MB/s transfers Mounting root from ufs:/dev/ad0s1a (cd0:ata1:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata1:0:0:0): NOT READY asc:3a,0 (cd0:ata1:0:0:0): Medium not present cd0 at ata1 bus 0 target 0 lun 0 cd0: <TOSHIBA CD-ROM XM-6402B 1008> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd1:ata1:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd1:ata1:0:1:0): NOT READY csi:0,0,13,4c asc:3a,0 (cd1:ata1:0:1:0): Medium not present cd1 at ata1 bus 0 target 1 lun 0 cd1: <ATAPI CD-R/RW CRW6206A 1.2A> Removable CD-ROM SCSI-0 device cd1: Serial Number \^_ cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present ad0s1: type 0xa5, start 63, end = 60018839, size 60018777 : OK start_init: trying /sbin/init Linux ELF exec handler installed And here is my kernel config file: machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GUTROT maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapicam # emulate ATAPI devices as SCSI ditto via CAM options ATA_STATIC_ID # Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard # SCSI shit device scbus device da device sa device cd device pass # CAM passthrough driver device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device firewire # firewire bus code device sbp # requires scbus and da # For PnP/PCI sound cards device pcm Here's my pciconf -v -l chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)' class = bridge subclass = HOST-PCI pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge' class = bridge subclass = PCI-PCI isab0@pci0:4:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:4:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller' class = mass storage subclass = ATA uhci0@pci0:4:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82371AB/EB/MB PIIX4/4E/4M USB Interface' class = serial bus subclass = USB chip1@pci0:4:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller' class = bridge subclass = PCI-unknown xl0@pci0:11:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00 vendor = '3COM Corp, Networking Division' device = '3C905B-TX Fast Etherlink 10/100 PCI TX NIC' class = network subclass = ethernet none0@pci0:12:0: class=0x040000 card=0x00000000 chip=0x0001121a rev=0x02 hdr=0x00 vendor = '3dfx Interactive Inc' device = 'Voodoo Voodoo 3D Acceleration Chip' class = multimedia subclass = video none1@pci1:0:0: class=0x030000 card=0xff00102b chip=0x0521102b rev=0x01 hdr=0x00 vendor = 'Matrox Graphics Inc' device = 'MGA-G200B Chipset (AGP)' class = display subclass = VGA And here is what I get when I plug my archos in and type: kldload firewire > /dev/null 2>&1 kldload sbp > /dev/null 2>&1 kldload if_fwe > /dev/null 2>&1 ugen0: In-System Design USB Storage Adapter, rev 1.10/1.10, addr 2 can't re-use a leaf (firewire_debug)! can't re-use a leaf (fwmem_debug)! module_register: module fwohci/firewire already exists! linker_file_sysinit "firewire.ko" failed to register! 17 can't re-use a leaf (sbp_debug)! module_register: module firewire/sbp already exists! linker_file_sysinit "sbp.ko" failed to register! 17 On Fri, 2003-01-03 at 13:31, Dirk-Willem van Gulik wrote: > > > On his page it says to compile firewire, sbp, scbus, da and umass. > > I'm cvsup'ed to 4.7 stable from release and did what he said. When I > > try and 'mount -t msdos /dev/da0s1 /archos' I get 'Device not > > configured'. > > I take it you've seen /sys/dev/firewire/00README ? > > Perhaps you want to do a verbose (-v) boot; and/or try pciconf -v -l. > > As in the dmesg you supplied there does not seem to be a fwohci entry. > Which is the thing which connects to the actual hardware. > > Dw. > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message