hello, does anyone have freebsd working with a shuttle s40g xpc? at random times, under heavy disk access, i will get either a bus error or kernel panic and the machine will restart itself.
errors i've seen are things like: panicstr: softdep_lock: locking against myself vm_page_unwire: invalid wire count: 0 bus error i also have a promise fasttrack 100 tx2 IDE RAID card installed in the box, but as far as i can tell it seems to be recognized and working well. i have yet to pull that out and test it with a HD plugged into the motherboard's IDE connectors, but i was wondering if anyone else was using the ss40g without problems. the ss40g uses a shuttle spacewalker fs40 amd motherboard w/ a sis 740/961 chipset. cpu is an athlon 2100+ xp. 512mb ddr2100 ram. promise fasttrack 100 tx2 IDE RAID controller. two 40gb seagate barracuda IV HDs. one aopen dvd-rom (dvd-1640 pro 0122). dmesg output: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) XP 1500+ (1311.68-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 503316480 (491520K bytes) avail memory = 484462592 (473108K bytes) Preloaded elf kernel "kernel" at 0xc050f000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00fde70 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <SiS model 6325 VGA-compatible display device> at 0.0 isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xed110000-0xed110fff irq 11 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xed111000-0xed111fff irq 9 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 5591 ATA100 controller> port 0x4000-0x400f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 10.0 irq 5 atapci1: <Promise TX2 ATA100 controller> port 0xe400-0xe40f,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 mem 0xed1 00000-0xed10ffff irq 11 at device 12.0 on pci0 ata2: at 0xd400 on atapci1 ata3: at 0xdc00 on atapci1 rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xed112000-0xed1120ff irq 10 at device 15.0 on pci0 rl0: Ethernet address: 00:30:1b:11:21:bd miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <unknown card> (vendor=0x11c1, dev=0x5811) at 16.0 irq 11 pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd87ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ar0: 38166MB <ATA RAID1 array> [4865/255/63] status: READY subdisks: 0 READY ad4: 38166MB <ST340016A> [77545/16/63] at ata2-master UDMA100 1 READY ad6: 38166MB <ST340016A> [77545/16/63] at ata3-master UDMA100 acd0: DVD-ROM <AOpen Inc. DVD-ROM DVD-1640 PRO 0122> at ata0-master PIO4 =jay To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message