IF you can find the documentation for the motherboard, see if there is a
reset jumper. That jumper should reset the BIOS to factory defaults to
allow it to get through the post and into setup. Some motherboards
actually take you into setup with the jumper moved to reset bad configurations.
Also, unplug any cards and drives, leave the system board with just ram and
cpu and video (unless it is built in) until you get it configured.
-Derek
At 12:11 AM 6/14/2006, Garrett Cooper wrote:
Hello again all,
I know this isn't a FreeBSD question really, but I just started
up a motherboard with onboard SCSI (Adaptec AIC-7896), and for some odd
reason it freezes pre-POST before it attempts to boot and there isn't any
way where I can get into the BIOS to change the settings it seems. Does
anyone know how I can maybe disable the onboard SCSI controller since it
appears to hang while detecting disks?
Thanks a million!
-Garrett
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"