Chuck Swiger wrote:
On Oct 6, 2006, at 2:26 PM, Noah wrote:
any clues why ssh is hanging before a prompt is provided from the
server side. this prompt stalling behavior is only happening when I
am coming from my OSX ssh client. Any clues on this? I have never see
this betwe.
Looks like your SSH keypair has been mangled:
% cat ~/.ssh/id_rsa
-----BEGIN RSA PRIVATE KEY-----
[ ...should contain base-64 encoded data... ]
-----END RSA PRIVATE KEY-----
If you don't have a valid keypair there in id_rsa and id_rsa.pub, use
ssh-keygen to make a new one.
Hi,
something still seems strange. I have ~/.ssh/id_rsa and
~/.ssh/id_rsa.pub files. I am able to log in just fine to other servers
using the keygen information without stalling. it is just two recently
built servers out of about 10 that are displaying the stalling issue.
Here is from a server that works fine with no stall:
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /Users/username/.ssh/config
debug1: Applying options for hostname
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to host.domain.com [172.xx.yy.zz] port 22.
debug1: Connection established.
debug3: Not a RSA1 key file /Users/username/.ssh/id_rsa.
debug2: key_type_from_name: unknown key type '-----BEGIN'
debug3: key_read: missing keytype
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug3: key_read: missing whitespace
debug2: key_type_from_name: unknown key type '-----END'
debug3: key_read: missing keytype
debug1: identity file /Users/username/.ssh/id_rsa type 1
debug1: identity file /Users/username/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.9p1
debug1: match: OpenSSH_3.9p1 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: Miscellaneous failure
No credentials cache found
debug1: Miscellaneous failure
No credentials cache found
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [EMAIL PROTECTED],zlib,none
debug2: kex_parse_kexinit: [EMAIL PROTECTED],zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[EMAIL
PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 zlib
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 zlib
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 131/256
debug2: bits set: 496/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /Users/username/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 7
debug3: check_host_in_hostfile: filename /Users/username/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 7
debug1: Host 'host.domain.com' is known and matches the DSA host key.
debug1: Found key in /Users/username/.ssh/known_hosts:7
debug2: bits set: 521/1024
debug1: ssh_dss_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: Enabling compression at level 6.
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /Users/username/.ssh/id_rsa (0x301140)
debug2: key: /Users/username/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred
gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /Users/username/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug2: input_userauth_pk_ok: fp
a6:14:91:0e:e9:91:08:3d:6e:5d:bd:40:cf:e2:af:d3
debug3: sign_and_send_pubkey
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug3: tty_make_modes: ospeed 9600
debug3: tty_make_modes: ispeed 9600
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 255
debug3: tty_make_modes: 7 255
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 11 25
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 17 20
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 1
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 1
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 0
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 1
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE-p3-20041105 (hostname) #0: Wed Dec 1 09:35:10 PST
2004
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
for your release first as it's updated frequently.
o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search/. If the doc distribution has
been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the [EMAIL PROTECTED] mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
man page. If you are not familiar with man pages, type `man man'.
You may also use /stand/sysinstall to re-enter the installation and
configuration utility. Edit /etc/motd to change this login announcement.
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug2: channel 0: rcvd eof
debug2: channel 0: output open -> drain
debug2: channel 0: obuf empty
debug2: channel 0: close_write
debug2: channel 0: output drain -> closed
debug2: channel 0: rcvd close
debug2: channel 0: close_read
debug2: channel 0: input open -> closed
debug3: channel 0: will not send data after close
debug2: channel 0: almost dead
debug2: channel 0: gc: notify user
debug2: channel 0: gc: user detached
debug2: channel 0: send close
debug2: channel 0: is dead
debug2: channel 0: garbage collecting
debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
#0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cfd -1)
debug3: channel 0: close_fds r -1 w -1 e 6 c -1
Connection to host.domain.com closed.
debug1: Transferred: stdin 0, stdout 0, stderr 43 bytes in 1.7 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 25.4
debug1: Exit status 0
debug1: compress outgoing: raw data 1390, compressed 890, factor 0.64
debug1: compress incoming: raw data 2070, compressed 1551, factor 0.75
cheers,
Noah
---Chuck
