On Fri, 10 Jan 2003, Noah Garrett Wallach wrote: > > > Hi, > > > okay I just built a 4.7-STABLE kernel. but I am not able to boot when > using the GENERIC config file. I am kinda new at troubleshooting this > type of stuff so a clue is welcome. > > after installation and reboot > > I only get so far - to the following line: > > amr0: <AMI MegaRAID> mem 0xf0000000-0xf7ffffff irq 3 at device 0.0 on pci4
okay I removed the MegaRAID support from the kernel configuration file and rebuilt the kernel. things work fine now. but I am wondering why there is still a hang on kernel boot for when the RAID card is defined. commented: # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device iir # Intel Integrated RAID #device mly # Mylex AcceleRAID/eXtremeRAID #device ciss # Compaq SmartRAID 5* series # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade > > the next line should be (from the 4.6-STABLE old kernel) > > amr0: <PERC 3/DC> Firmware 1.72, BIOS 3.27, 128MB RAM > > > what is creating this issue? I think this MegaRAID card is supported - so > I am not sure why loading stalls here. > > - noah > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message