In the last episode (Jan 07), Michael M. Press said: > I have a 2 gigabyte USB memory stick from made by PNY. When I plug it > in, I get the following: > > umass0: vendor 0x0930 USB Flash Memory, rev 2.00/2.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: < USB Flash Memory 6.50> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: 1901MB (3894975 512 byte sectors: 255H 63S/T 242C) > cd1 at umass-sim0 bus 0 target 0 lun 1 > cd1: < USB Flash Memory 6.50> Removable CD-ROM SCSI-0 device > cd1: 40.000MB/s transfers > cd1: Attempt to query device size failed: NOT READY, Medium not present > > I want to be able to mount the device read-write, so I use the > following command: > > mount -t cd9660 -o rw /dev/cd1 /media/flashdrv > > The command runs without spitting any errors at me, but it does a > read-only mount. I can see files on the drive, but (of course) I > can't change them. Does my problem have anything to do with the > device being detected as a CD-ROM drive? If that is what's wrong I > don't really know where to start looking to fix it. Any ideas?
Very interesting! cd1 and da0 look like the same device, with cd1 just on LUN 1. I bet if you were to examine /dev/da0 you'd see the real writable FAT filesystem there. I wonder if it is doing fat->cd9660 filesystem emulation on the fly? -- Dan Nelson [EMAIL PROTECTED] _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"