Hello again,
> > I hate to say this but this driver only seems to compile on -CURRENT as > > far as i can tell (and as far as the conversation at > > I don't remember from where I downloaded it, but this one [attached] > works fine on 6-STABLE for me! > make > make install > kldload if_wpi I built it. It works but it complains and sometimes it shuts down itself... That would be nice to know where to report the error messages Jan 18 20:23:59 guenevere kernel: config chan 6 flags 8035 cck f ofdm 15 Jan 18 20:23:59 guenevere kernel: wpi0: link state changed to DOWN Jan 18 20:23:59 guenevere kernel: scan finished Jan 18 20:24:30 guenevere last message repeated 6 times Jan 18 20:24:50 guenevere last message repeated 4 times Jan 18 20:24:55 guenevere kernel: rx tail flags error 702 Jan 18 20:24:55 guenevere kernel: scan finished Jan 18 20:25:26 guenevere last message repeated 6 times Jan 18 20:26:52 guenevere last message repeated 17 times Jan 18 20:26:52 guenevere kernel: config chan 6 flags 8035 cck f ofdm 15 Jan 18 20:26:52 guenevere kernel: config chan 6 flags 8035 Jan 18 20:26:52 guenevere kernel: wpi0: link state changed to UP Jan 18 20:26:59 guenevere dhclient: New IP Address (wpi0): 192.168.1.7 Jan 18 20:26:59 guenevere dhclient: New Subnet Mask (wpi0): 255.255.255.0 Jan 18 20:26:59 guenevere dhclient: New Broadcast Address (wpi0): 192.168.1.255 Jan 18 20:26:59 guenevere dhclient: New Routers (wpi0): 192.168.1.1 Jan 18 20:28:52 guenevere kernel: rx tail flags error 702 Jan 18 20:29:24 guenevere last message repeated 3 times Jan 18 20:31:15 guenevere last message repeated 6 times Daniel _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
