Hello I am using various kde applications, Amarok, kaudiocreator, kaffeine... KDE appears to be the problem. I used cdda2wav and even kaudiocreator is ripping audio cds, that was not working earlier. So the problem my be with the kde applications not freebsd. K3b does not work. I am installing xmms to see if that works and also try a commandline application to play a cd.
Thank you Aaron On Sunday 04 March 2007 10:40 am, Garrett Cooper wrote: > Garrett Cooper wrote: > > Aaron Siegel wrote: > >> Hello > >> > >> Cannot > >> read or play audio cdrom disks. run the Windows install for Win4BSD > >> the install worked worked with a standard cdrom drive > >> > >> Can > >> burn CD-R (with cdrecord dev=1,0,0) > >> burn DVD-RW (with mkisofs) > >> play Movie dvds. > >> read dvd disks > >> read data cdrom disks > >> > >> I am using 6.1 Release. > >> > >> /boot/loader.conf > >> atapicam_load="YES" > >> hw.ata.ata_dma="1" > >> hw.ata.atapi_dma="1" > >> > >> I have set the mode for the device to UDMA33 from UDMA66. > >> How can I set this up so the drive boots as UDMA33? Do I add the > >> following line into the device.hints: > >> hint.cd.0.mode="UDMA33"? > >> > >> acd0: DVDR <DVD RW DRU-820A/1.0b> at ata1-master UDMA66 > >> cd0 at ata1 bus 0 target 0 lun 0 > >> cd0: <SONY DVD RW DRU-820A 1.0b> Removable CD-ROM SCSI-0 device cd0: > >> 66.000MB/s transfers > >> > >> > >> I am receiving a following errors while booting > >> cd0: cd present [309837 x 2048 byte records] > >> (cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 > >> (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > >> (cd0:ata1:0:0:0): SCSI Status: Check Condition > >> (cd0:ata1:0:0:0): ILLEGAL REQUEST csi:0,0,21,0 asc:64,0 > >> (cd0:ata1:0:0:0): Illegal mode for this track > >> (cd0:ata1:0:0:0): Unretryable error > >> (cd0:ata1:0:0:0): cddone: got error 0x6 back > >> > >> The errors when playing a DVD > >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 12 fb 0 0 0 > >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > >> (cd0:ata1:0:0:0): SCSI Status: Check Condition > >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > >> (cd0:ata1:0:0:0): Unretryable error > >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 13 4e 0 0 0 > >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > >> (cd0:ata1:0:0:0): SCSI Status: Check Condition > >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > >> (cd0:ata1:0:0:0): Unretryable error > >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 45 f0 0 0 0 > >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > >> (cd0:ata1:0:0:0): SCSI Status: Check Condition > >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > >> (cd0:ata1:0:0:0): Unretryable error > >> (cd0:ata1:0:0:0): Vendor Specific Command. CDB: a4 0 0 31 9e 34 0 0 0 > >> c c4 0 (cd0:ata1:0:0:0): CAM Status: SCSI Status Error > >> (cd0:ata1:0:0:0): SCSI Status: Check Condition > >> (cd0:ata1:0:0:0): ILLEGAL REQUEST asc:6f,4 > >> (cd0:ata1:0:0:0): Reserved ASC/ASCQ pair > >> (cd0:ata1:0:0:0): Unretryable error > >> > >> Thank you > >> Aaron > > > > The question is, how are you trying to read the audio information on the > > disk(s). > > -Garrett > > PS You can't mount audio CDs, if that's what you're trying to do... you > have to play them directly from a media player of some kind (xmms, > audacious, etc). > -Garrett > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"