Hi Derek, at least your comment to SATA hot swap is right. But disk failure are during work anyway. So at least after rebooting and replacing the disk (I reconnected the disk offline and powered on again) I had to had a chance to rebuild the array. But as described I get no prompt in any boot option. Dietmar
________________________________ From: Derek Ragona [mailto:[EMAIL PROTECTED] Sent: Mon 3/5/2007 11:50 PM To: Michel, Dietmar; freebsd-questions@freebsd.org Subject: Re: RAID5 degraded - system hangs I'm no expert, but have experienced a few RAID issues. First, RAID 5 will become degraded and will try to rebuild upon a drive failure, once the failed drive is replaces. In Mirrored RAID, RAID 1, or RAID 10, the system will continue to function on the good drive but will alert the administrator of the drive failure. One last thing, SATA RAID drives, while they are often said to be hot-swapable, most manufacturer's recommend power-off then swap drives. With SCSI hot swapable drives they can be swapped with power still on. -Derek At 09:22 AM 3/5/2007, Michel, Dietmar wrote: Hi Guys, I´m using an older Server with FreeBSD 6.2 als Fileserver in my home office. Now I made an upgrade using 4 SATA II disks connected to a promise TX4310 Raid controller. Defining a RAID5 a bios level, starting the server and building up the Raid at OS level: # atacontrol create RAID5 32 ad4 ad6 ad8 ad10 # bsdlable ... # newfs ... And now I have a functional Raid named ar0. At boot time the bios told me that even at this level the raid in initializing - world seemed to be ok. Now I tried to prove Raid function and disconnect one disk. Theoretical data is covered by the rest of 3 ... but after I get the system message that one disk has been disconnected the maschine stopps working. Told me: ar0 raid 5 degarded after a fw minutes no input is possibble. Even after reboot .... ar0: disk0 Ready ar0: disk1 Ready ar0: disk2 Ready ar0: disk3 down no device found ... end of work No single user mode or other starting option seemed to work. I have no chance to rebuild the raid via atacontrol. Any hints? Raid without reliability doesn´t make sense! Regards Dietmar _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. MailScanner thanks transtec Computers for their support. -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. MailScanner thanks transtec Computers <http://www.transtec.co.uk/> for their support. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
