Hi all, I have some trouble with my SATA-DVDRW. It's not recognised in the boot process, although I think all kernel settings are correct. A SATA harddisk works fine. Is there a general issue with SATA-dvd burners?
********************************** ** MY KERNEL VERSION ** ********************************** FreeBSD medea.exsomnis.de 6.2-STABLE FreeBSD 6.2-STABLE #2: Fri Mar 2 07:16:55 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KERNEL amd64 ********************************** ** OUTPUT OF dmesg ** ********************************** attached file (dmesg.txt) -- Mit freundlichen Grüßen Martin Möller <[EMAIL PROTECTED]>
Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #2: Fri Mar 2 07:16:55 CET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KERNEL ACPI APIC Table: <Nvidia AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3500+ (2211.34-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> real memory = 1073676288 (1023 MB) avail memory = 1027543040 (979 MB) ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xcc102000-0xcc102fff at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered umass0: Verbatim Store 'n' Go Pro, rev 2.00/2.00, addr 2 pcm0: <nVidia nForce4> port 0xd400-0xd4ff mem 0xcc101000-0xcc101fff irq 20 at device 4.0 on pci0 pcm0: <Avance Logic ALC850 AC97 Codec> atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd000-0xd00f mem 0xcc100000-0xcc100fff irq 21 at device 7.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci5: <ACPI PCI bus> on pcib1 pci5: <multimedia, video> at device 7.0 (no driver attached) pci5: <multimedia> at device 7.1 (no driver attached) ath0: <Atheros 5212> mem 0xcb000000-0xcb00ffff irq 18 at device 8.0 on pci5 ath0: Ethernet address: 00:0f:3d:ab:91:e2 ath0: mac 5.9 phy 4.3 radio 4.6 atapci2: <SiI 3114 SATA150 controller> port 0x9000-0x9007,0x9400-0x9403,0x9800-0x9807,0x9c00-0x9c03,0xa000-0xa00f mem 0xcb014000-0xcb0143ff irq 19 at device 10.0 on pci5 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 ata6: <ATA channel 2> on atapci2 ata7: <ATA channel 3> on atapci2 skc0: <Marvell Gigabit Ethernet> port 0xa400-0xa4ff mem 0xcb010000-0xcb013fff irq 17 at device 12.0 on pci5 skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:17:31:a6:a0:e4 miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci2: <ACPI PCI bus> on pcib4 pci2: <display, VGA> at device 0.0 (no driver attached) pci2: <display> at device 0.1 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci1: <ACPI PCI bus> on pcib5 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2211343459 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging limited to 10 packets/entry by default ad0: 152627MB <Seagate ST3160023A 8.01> at ata0-master UDMA100 acd0: DVDROM <PLEXTOR DVD-ROM PX-130A/1.02> at ata1-master UDMA33 ad6: 238475MB <Seagate ST3250624AS 3.AAE> at ata3-master SATA300 cd0 at ata1 bus 0 target 0 lun 0 cd0: <PLEXTOR DVD-ROM PX-130A 1.02> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0 at umass-sim0 bus 0 target 0 lun 0 da0: <VBTM Store 'n' Go Pro 6.51> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 961MB (1970175 512 byte sectors: 64H 32S/T 961C) Trying to mount root from ufs:/dev/ad0s2a sk0: link state changed to UP ath0: link state changed to UP
pgpCgpu4jvMSH.pgp
Description: PGP signature