Hello, i was trying to mount an external HDD in my machine running FBSD 6.2 RELEASE. I configured the kernel according to the Handbook and pluged the exernal HD. Then i typed (starting with # are my commands, otherwise output):
# dmesg acpi_tz0: failed to set new freq, disabling passive cooling umass0: vendor 0x04b4 Cypress AT2LP RC7, rev 2.00/2.40, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SAMSUNG SP2514N 0000> Fixed Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) # camcontrol devlist <SAMSUNG SP2514N 0000> at scbus0 target 0 lun 0 (pass0,da0) # ls /dev/da* /dev/da0 /dev/da0s1 # mkdir /exthd # mount_msdosfs /dev/da0 /exthd mount_msdosfs: /dev/da0: Invalid argument # mount_msdosfs /dev/da0s1 /exthd mount_msdosfs: /dev/da0s1: Invalid argument # dmesg mountmsdosfs(): bad FAT32 filesystem mountmsdosfs(): bad FAT32 filesystem # Uou, i did exactly as in the hadbook. The HDD was working fine in a Windows machine. # Thanks in advance for any tip ... -- _______________________________________________ Get your free email from http://bsdmail.com _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"