Thank you for your answer. I have checked write access to the device
/dev/dri/card0, everything seems to be OK.
# ls -l /dev/dri/card0
crw-rw-rw- 1 root wheel 0, 131 May 15 09:02 /dev/dri/card0
Because I don't know which device can cause the problem I also tried to
set write access to the following devices:
crw----rw- 1 root wheel 0, 29 May 15 09:02 /dev/agpgart
crw-r--rw- 1 root wheel 0, 15 May 15 09:02 /dev/pci
However it is still not working. Please see the Xorg.log file attached.
Ladislav
nawcom wrote:
Well, it shows that it has to do with device permissions; your root
can read and write to it, but your user account can't. be sure and
give your user write access to the device. Also your X log should be
able to describe in more detail on what the situation is that you are
having. check that and let me know if you got it working and also what
your X log says.
-Ben
Ladislav Jozsa wrote:
Hello there,
I'm trying to get 3D acceleration working on my ThinkPad R40 with ATI
Radeon Mobility 7500 graphic card. I'm running FreeBSD 6.1 and I'm
able to run 3D under root account, where glxinfo tells me the following:
# glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI Radeon 20050528 AGP 4x TCL
But when I try the same under non-root account the result is:
$ glxinfo | grep render
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
Thus 3D acceleration is not running. I've got loaded the following
graphic drivers :
9 1 0xc4c21000 1c000 radeon.ko
10 1 0xc4c47000 e000 drm.ko
"dmesg | grep drm" gives me:
drm0: <ATI Radeon LW RV200 Mobility 7500 M7> port 0x3000-0x30ff mem
0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.19.0 20050911
In Xorg configuration I have also loaded following modules and DRI
set properly:
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xie"
Load "pex5"
Load "freetype"
Load "type1"
EndSection
Section "DRI"
Mode 0666
EndSection
Does anyone know what else I need to run 3D under non-root account?
Many thanks,
Ladislav Jozsa
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"