Bob wrote:
The most common configuration for using two nic's is one nic is used for
your dsl or cable modem connection to your ISP and the second nic services
your local LAN.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ivan Carey
Sent: Tuesday, June 05, 2007 6:55 AM
To: freebsd-questions@freebsd.org
Subject: How to correctly use 2 on board nics
Hello
I have a server board with 2 onboard nic's
I have set them up in rc.conf as follows
defaultrouter="192.168.1.1"
network_interfaces="em0 em1 lo0"
ifconfig_em0="inet 192.168.1.3 netmask 255.255.255.0"
ifconfig_em1="inet 192.168.1.4 netmask 255.255.255.0"
The question, is this the correct configuration?
If I have both nic's connected to the switch I can ping 192.168.1.1 and
192.168.1.3 and 192.168.1.4
If I have only em0 connected I can ping 192.168.1.1 and 192.168.1.3
If I have only em1 connected I can ping 192.168.1.3.
What could the 2 onboard nic's be best used for. I was thinking that in
the event on was to fail then the other would still be ok.
Any ideas would help.
Thanks,
Ivan
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I guess the 'correct' way of using two NICs is really dependent upon
what your goal of using two NICs is. Do you want to be able to serve two
networks out of the NICs, one from each interface? Do you want to create
a gateway of some sort? What is it, exactly, you are trying to
accomplish by doing this?
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
