On Sat, Dec 08, 2007 at 05:03:03AM -0300, Celso Viana wrote: > Hi All, > > I have 2 machines (A and B) interconnected by a cable network > crossover; added the following addresses on the network card: > > Machine "A": 192.168.1.1/24 > Machine "B": 10.10.1.1/24 > > Question: How would for these machines to communicate, adding routes manually? > > Thanks > > -- > Celso Vianna > BSD User: 51318 > http://www.bsdcounter.org > > 63 8404-8559 > Palmas/TO > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "[EMAIL PROTECTED]"
There shouldn't need to be any changes to the routing tables needed if they are directly connected. If they do need to be on seperate subnets, then you can add aliases to each interface so that they see each other as on the same subnet. On machine "A": # ifconfig <interface> alias 10.10.1.2 255.255.255.0 (Any number that isn't 0, 1, or 255 ought to work for the interface address but we'll use 2 for simplicity) On machine "B": # ifconfig <interface> alias 192.168.1.2 255.255.255.0 Hopefully this helps you. -- David Michael Curry (Dave) <[EMAIL PROTECTED]> () ASCII Ribbon Campaign | Against HTML e-mail /\ www.asciiribbon.org | Against proprietary extensions _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
