On the controller there it says that it supports freebsd 6.1. And yes there is documentation on how to install freebsd 6.1 on the raid. But for now i have installed freebsd on a RAID1 system, and i have problem getting the card detcted, i run a 5TB RAID 6 on this card. Didn't thought that it could be that much differens between version 6.1 and 6.2. Gonna try to reinstall. After the reinstall i got the card up and running. I see it get detected and it all looks ok. I go in and do a fdisk on the drive and label/mount it. I do all this in sysinstall. I can see that the drive is 4648GB so it all looks ok with the RAID 6 Drive. When i later quit sysinstall and check the mounts i see that the drive space is 532GB and available space is 500GB. This looks totally wrong. Is there any limitations that im not aware of?
/Goran On Dec 13, 2007 1:10 AM, Erik Trulsson <[EMAIL PROTECTED]> wrote: > On Wed, Dec 12, 2007 at 09:35:09PM +0100, Göran Nilsson wrote: > > Hi, > > I have a problem getting my EX12350 Radicontroller to work under FreeBSD > 6.2. > > When i start the computer or rund a dmesg i can see that > > "mass storage raid ..no driver attached" > > For what i can see this card should be supported under FreeBSD 6.1, but > > could it be soo that the support is missing in 6.2? Any tips? > > Should i try to go for the 6.3 RC1. I really need this card up and > running, > > i run it as a RAID 6. I have tried this with just the generic kernel, > > So the most should be in there? > > > > Ideas, is most appriciating, coz im kinda stuck. > > > > > What makes you think this card is supported by FreeBSD 6.1? > > As far as I can tell there is no driver for that card included with any > FreeBSD release. If it was supported the driver would have been included > in > GENERIC kernel, and if was supported in 6.1 it would have been in 6.2also. > > > It is quite possible however that Promise provides their own FreeBSD > driver > for that card. If that is the case you should ask Promise which > version(s) > of FreeBSD the driver supports and how to install it - or read their > documentation where such information can likely be found. > > > > > -- > <Insert your favourite quote here.> > Erik Trulsson > [EMAIL PROTECTED] > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
