[EMAIL PROTECTED] wrote:
On 25/12/2007, Tim Daneliuk <[EMAIL PROTECTED]> wrote:
I am building a new server out of both older and brand new
components. It is based on a Pentium D 925 and ABIT LG-95Z
mobo. The DVD-RW is a Lite-On about a year old with very
low hours on it.
So ... here's a fun one: I can boot and install FreeBSD 4.x (CD)
or Novell SUSE Enterprise Linux Desktop 10 SP1 (DVD) via the
DVD. But attempting to do this with 6.x (I have tried 6.2R and
6.3-PRE disk #1) causes a hang during boot. The loader gets
as far as showing the vertical bar that ordinarily "spins"
to show intitial kernel loading progress and the the machine
just sits there. There is some further activity on the optical
drive at this point and then the cursor sort of jumps around a bit.
I've not yet tried swapping the optical drive out - though I doubt
this is the problem since I can load the other OSs. I've tried
removing and moving memory sticks in case this is a flakey
memory problem - no change. I've tried removing the only
two cards in the machine: 3COM 905C-TX and an Adaptec 2940UW -
no change.
I have one last ditch thing I will try later tonight which is
to force the DVD IDE port into PIO mode and out of DMA mode.
But that's it. I am stumped. Ideas anyone?
If it is not hardware, check your bios settings (and mayhap
set back to default or very conservative) (of which the PIO
trick may work).
Well ... no amount of BIOS fiddling fixes this problem.
Also, 7.0 ran extremely well for me back in Sept., you might
try it as an alternative.
I downloaded 7.0-BETA4 and burned the CD - This exhibits the
exact same boot time behavior as the earlier 6.x releases.
In summary:
1) I can boot 4.x or Linux install CDs. I cannot boot 6.x or 7.x
install CD - system hangs at the beginning of loading the kernel
and the video cursor starts jumping around - presumably because
the program has lost its way. (I am assuming that the "program"
having trouble is the loader itself, since the kernel is not yet
loaded at this point.)
2) Changing optical drives made no difference.
3) Reordering/removing memory sticks made no difference. I am running
a memory test ATM just to be sure, but so far, the memory seems fine.
4) No amount of poking around in the BIOS settings seems to help either.
I am starting to suspect the MOBO. If I stick a couple of cards in the
two available PCI slots, the system has trouble taking me into the BIOS
screen. I have to remove the cards to reliably get into the BIOS
settings menu. I wonder if this is one of those situations where there
are not enough IRQs to go around.
I remain confused ...
--
----------------------------------------------------------------------------
Tim Daneliuk [EMAIL PROTECTED]
PGP Key: http://www.tundraware.com/PGP/
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
