Mel wrote:
On Saturday 02 February 2008 11:14:04 Gordon McKee wrote:
Hi
Does anyone know how to get FreeBSD to work with the above chipset. Tried
6.3 and 7 ISO images. Get lots of disk and no NIC is detected.
I have
http://www.foxconnchannel.com/product/Motherboards/detail_spec.aspx?ID=en-u
s0000345.
RTL8111B should be supported with rl driver. Apparently it's not detected, so
a pciconf -lv |grep -A4 '^none' would help greatly.
This was on the list a while ago about RealTek 8110.
Bernd Walter wrote:
> >
> >Realtek has two devices for Gbit PCI: the 8169 and the reduced 8110.
> >They are both more or less the same - likely even the same chip inside,
> >but the later has pins reduced.
> >AFAIK the later can't have an external PHY, which you can't have anyway
> >if there is neither a connector or PHY itself connected on the board.
> >The 8168 is the successor for PCI express, with the 8111 being the new
> >reduced variant.
> >Both PCIe are detected but didn't run stable with our re(4), but it is
> >said that the latest driver fixes this and also adds a good speed
> >improvement.
> >
> >
Good Luck...
--
~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740
+ http://hawaiidakine.com + http://freebsdinfo.org + [EMAIL PROTECTED] +
+ http://aloha50.net - Supporting - FreeBSD 6.* - 7.* +
"All that's really worth doing is what we do for others."- Lewis Carrol
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"