On Wed, 19 Mar 2008 00:43:58 +0100 Jon Theil Nielsen <[EMAIL PROTECTED]> wrote: > > I have tried some different ways to make a working VPN server on FreeBSD 7.0. > The main goal is to make it possible for Windows clients to access their > Samba home shares. I'm not sure if mpd is the best solution, but I will give > it a try. > I have installed /usr/ports/mpd4 and have the following configuration:
You'll do much better in freebsd-net@ with this. I've copied Alexander Motin, current author/maintainer, as he may not be watching [EMAIL PROTECTED] > ==============/usr/local/etc/mpd4/mpd.conf============ > startup: > <don't know what to put in here...> Stuff like configuring the console and/or web interface, logging etc. > default: > load pptp1 > I'm not sure whether leading whitespace on non-label lines is still required as with ppp.conf, but it can't hurt to follow the examples. > pptp1: > new -i ng0 pptp1 pptp1 > set iface disable on-demand > set iface enable proxy-arp > set iface idle 0 > set iface enable tcpmssfix > set bundle enable multilink > set link yes acfcomp protocomp > set link no pap chap > set link enable chap > set link keep-alive 10 60 > set ipcp yes vjcomp > set ipcp ranges 192.168.1.4/32 192.168.1.151/32 > set ipcp dns 192.168.1.4 > set ipcp nbns 192.168.1.4 > set link disable pap > set bundle enable compression > set ccp yes mppc > #set ccp yes mpp-e40 > set ccp yes mpp-e128 > set ccp yes mpp-stateless > #set bundle enable crypt-reqd > > ==============/usr/local/etc/mpd4/mpd.linksf============ I assume 'mpd.linksf' is a typo .. > pptp1: > set link type pptp ## define the link type protocol as PPTP > set pptp self 192.168.1.4 ## define the IP address on which MPD will > run > set pptp enable incoming ## define the connection as Incoming > set pptp disable originate ## enables PPTP connection for communication > with the client > > And then I also have a mpd.secrets file of course. > > I can start the service, but I don't see any pptp interface after an > ifconfig command. And netstat -an does not show any port 1723 listening. > > Do I need to have a customized kernel to make it work? Or are there any > obvious errors in the above configuration? Can't help with pptp, I only use pppoe, but have posted this to bring it to Alexander's attention. He'll most likely want to see some logging .. cheers, Ian _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"