topology:
wall-->bellsouth router-->linksys AP
linksys has a static IP of 192.168.1.3
bellsouth router has a static IP of 192.168.1.254
You need to configure different prefixes (aka subnets) on each side of
the Linksys router:
LAN side on Bellsouth: 192.168.1.254 255.255.255.0
WAN side on Linksys: 192.168.1.3 255.255.255.0
LAN (wifi) side of Linksys: 192.168.2.1 255.255.255.0
Laptop: 192.168.2.2 255.255.255.0
Laptop gateway: 192.168.2.1
A trick I recommend very frequently to our ADSL subs that want to
implement a wireless router into their network who are already using our
equipment that has NAT enabled (to avoid double-NAT), is to disable DHCP
on the LAN side of the Linksys, disable the WAN interface, and connect
the ADSL modem to one of the LAN ports on the Linksys.
Essentially, your access point will then be just that.
Hope I understood your problem properly.
Steve
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
