Hi, When using software based RAID controllers (e.g. ICH9R) in RAID-1 scenario, if any of the drives fail and the server reboot, the system will not come back up.
This has been observed on FreeBSD 6.3-RELEASE i386 with following error: Fatal trap 12: page fault while in kernel mode fault virtual address = 0xf4d988d8 fault code = supervisor read, page not present instruction pointer = 0x20:0xc0847e06 stack pointer = 0x28:0xc0c20bfc frame pointer = 0x28:0xc0c20c40 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) trap number = 12 panic: page fault I wasn't able to get the machine up into any mode except to the basic prompt. This problem can also be duplicated if you move the drive from ICH9R RAID to non-RAID controller Any tips on how to get the FBSD system operational again without having to do a reinstall? Thanks, Tamouh Hakmi _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"