Achilleas Mantzios wrote:
While experimenting, i noticed the 1st and 3rd temperatures from mbmon to be
updated in a fashion that seems
natural.
[EMAIL PROTECTED] ~]% mbmon
Temp.= 41.0, 201.0, 42.0; Rot.= 3443, 0, 0
Vcore = 1.50, 1.81; Volt. = 3.30, 5.08, 11.43, -11.74, -1.69
What chipset is the mobo based on? mbmon runs fine on my 865G and a 3Ghz
P4 CPU. You are probably correct, the middle temp may represent a sensor
that is not recognized, but the other readings seem normal.
i'll let you know next time i open the case. Is there any reading from dmesg or
sysctl that can reveal
that info?
Sure. There are various places to get this info. Sometimes the BIOS
startup messages contain a hint on the chipset (like 865, 915 and so on).
My dmesg also shows:
agp0: <Intel 82865 host to AGP bridge> on hostb0
And you can also use pciconf -v -l
hdr=0x00
vendor = 'Intel Corporation'
device = '82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface'
class = bridge
subclass = HOST-PCI
Considering that you are running an older P4, probably socket 478,
chances are you are using an 845 or 848 or 865 chipset.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
