Hello, I'm attempting to set up a transparent bridge in FreeBSD 7.0 to eventually act as a PF/Snort box, and it needs to be VLAN aware. However, I don't seem to be on the right track as far as setting it up.
I have, for instance, VLAN 10 that it needs to be aware of, and this network segment is on VLAN 10 from a switch higher up. I have the current setup, but once it's running, I can't ping anything. bge0 is the outside interface, bge1 is inside: defaultrouter="192.168.1.1" gateway_enable="YES" cloned_interfaces="bridge0 vlan0 vlan1" ifconfig_vlan0="vlan 10 vlandev bge0" ifconfig_vlan1="vlan 10 vlandev bge1" ifconfig_bridge0="inet 192.168.1.10 netmask 255.255.0.0 addm bge0 addm bge1 addm vlan0 addm vlan1 up" ifconfig_bge0="up" ifconfig_bge1="up" What am I doing wrong? Thank You, Mike Sweetser _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"