Hello, On Wed, 2008-10-29 at 13:27 +0100, Julien Cigar wrote: > Our hardware begins to age and we plan to buy two new machines at HP. > Our choice focused on the HP Proliant DL360 G5. As HP doesn't officially > support FreeBSD, I checked with the "7.0-RELEASE Hardware Notes" and > everything seems to be supported, except the network interface which is > an HP NC373i. From what I can see, only NC370i and NC370T are supported. > Can someone confirm that this chip is not supported
I have just got two new DL360G5 with xeon E5420 cpus (HP Ref Number: 470064-731), and the on-board network cards are seen from FreeBSD7 as: bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3 miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:21:5a:a6:8f:f0 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01090605); Flags( MFW MSI ) So there are good chances it's the same on your setup? But maybe it's a new model of mainboard... regards & HTH, Olivier _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
