Hello, all!
I have Asus X51RL laptop with FreeBSD 7.1-RC1 installed.
There were no troubles with GENERIC kernel, but when I've compiled custom
kernel, rl ethernet driver tells to the console a lot of errors:
rl0: link state changed to UP
rl0: watchdog timeout
rl0: watchdog timeout
Any mistake?
>uname -a:
FreeBSD asusbook.local 7.1-RC1 FreeBSD 7.1-RC1 #0: Mon Dec 15 08:40:11 MSK 2008
r...@asusbook.local:/usr/obj/usr/src/sys/GENERIC i386
>pciconf -lv:
r...@pci0:8:7:0: class=0x020000 card=0x10451043 chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
>dmesg from custom kernel (ASUSBOOK):
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC1 #2: Sun Dec 14 20:13:33 MSK 2008
r...@asusbook.local:/usr/obj/usr/src/sys/ASUSBOOK
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 550 @ 2.00GHz (1995.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
real memory = 2012905472 (1919 MB)
avail memory = 1964134400 (1873 MB)
kbd1 at kbdmux0
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
RF5413, RF2133, RF2425, RF2417)
acpi0: <A.M.I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 77f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
acpi_asus0: Unsupported Asus laptop: X51RL
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link3: BIOS IRQ 10 for 0.19.INTD is invalid
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x7800-0x78ff mem
0x90000000-0x9fffffff,0xf88f0000-0xf88fffff irq 5 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xf89f0000-0xf89fffff irq 11 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:9e:d1:34
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port
0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem
0xfebffc00-0xfebfffff irq 3 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at
device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq 5 at
device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfebfc000-0xfebfcfff irq 4 at
device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfebfb000-0xfebfbfff irq 5 at
device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq 4 at
device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 9 at
device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfebf4000-0xfebf7fff
irq 11 at device 20.2 on pci0
pcm0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
cbb0: <RF5C476 PCI-CardBus Bridge> irq 5 at device 1.0 on pci8
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
pci8: <base peripheral> at device 1.1 (no driver attached)
pci8: <base peripheral> at device 1.2 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xfeaff400-0xfeaff4ff
irq 5 at device 7.0 on pci8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:1f:c6:f1:38:ff
rl0: [ITHREAD]
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Synaptics Touchpad, device ID 3
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_asus0: Unsupported Asus laptop: X51RL
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1995141435 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDR <SlimtypeDVD A DS8A1P/CA24> at ata0-slave UDMA33
ad4: 152627MB <Seagate ST9160827AS 3.AAA> at ata2-master SATA150
pcm0: <HDA Codec: Realtek ALC660>
pcm0: <HDA Driver Revision: 20080420_0052>
Trying to mount root from ufs:/dev/ad4s2a
rl0: link state changed to UP
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
rl0: watchdog timeout
> dmesg from GENERIC kernel:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RC1 #0: Mon Dec 15 08:40:11 MSK 2008
r...@asusbook.local:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 550 @ 2.00GHz (1995.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
real memory = 2012905472 (1919 MB)
avail memory = 1959628800 (1868 MB)
ACPI APIC Table: <A.M.I OEMAPIC >
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413,
RF5413, RF2133, RF2425, RF2417)
acpi0: <A.M.I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 77f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
acpi_asus0: Unsupported Asus laptop: X51RL
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x7800-0x78ff mem
0x90000000-0x9fffffff,0xf88f0000-0xf88fffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xf89f0000-0xf89fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:9e:d1:34
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port
0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem
0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at
device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq 17 at
device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfebfc000-0xfebfcfff irq 18 at
device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfebfb000-0xfebfbfff irq 17 at
device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq 18 at
device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 19 at
device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfebf4000-0xfebf7fff
irq 16 at device 20.2 on pci0
pcm0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
cbb0: <RF5C476 PCI-CardBus Bridge> irq 21 at device 1.0 on pci8
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
pci8: <base peripheral> at device 1.1 (no driver attached)
pci8: <base peripheral> at device 1.2 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xfeaff400-0xfeaff4ff
irq 20 at device 7.0 on pci8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:1f:c6:f1:38:ff
rl0: [ITHREAD]
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Synaptics Touchpad, device ID 3
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_asus0: Unsupported Asus laptop: X51RL
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub2
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1995140715 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDR <SlimtypeDVD A DS8A1P/CA24> at ata0-slave UDMA33
ad4: 152627MB <Seagate ST9160827AS 3.AAA> at ata2-master SATA150
pcm0: <HDA Codec: Realtek ALC660>
pcm0: <HDA Driver Revision: 20080420_0052>
Trying to mount root from ufs:/dev/ad4s2a
rl0: link state changed to UP
custom kernel (ASUSBOOK) config:
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.15.2.1 2008/11/25 02:59:29
kensmith Exp $
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident ASUSBOOK
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
#options KDTRACE_HOOKS # Kernel DTrace hooks
# To make an SMP kernel, the next two lines are needed
#options SMP # Symmetric MultiProcessor Kernel
#device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of
`ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 Gigabit Ethernet Family
#device igb # Intel PRO/1000 PCIE Server Gigabit Family
#device ixgb # Intel PRO/10GbE Ethernet Card
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
device wlan # 802.11 support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device wlan_scan_ap # 802.11 AP mode scanning
device wlan_scan_sta # 802.11 STA mode scanning
#device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # Atheros HAL (Hardware Access Layer)
device ath_rate_sample # SampleRate tx rate control for ath
#device awi # BayStack 660 and others
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
#device rum # Ralink Technology RT2501USB wireless NICs
#device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Serial devices
device ucom # Generic com ttys
device uark # Technologies ARK3116 based serial adapters
device ubsa # Belkin F5U103 and compatible serial adapters
device ubser # BWCT console serial adapters
device uftdi # For FTDI usb serial adapters
device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
device uslcom # SI Labs CP2101/CP2102 serial adapters
device uvisor # Visor and Palm devices
device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
Thank you for help.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
