Sorry for my English...))) FreeBSD 7.0 data from Terminal(after using make buildkernel KERNCONF=MYKERNEL) part with errors: ***************** linking kernel uipc_syscalls.o(.text+0x39f): In function `sctp_generic_recvmsg': : undefined reference to `sctp_sorecvmsg' uipc_syscalls.o(.text+0x21c6): In function `sctp_generic_sendmsg_iov': : undefined reference to `sctp_lower_sosend' uipc_syscalls.o(.text+0x2462): In function `sctp_generic_sendmsg': : undefined reference to `sctp_lower_sosend' uipc_syscalls.o(.text+0x2611): In function `sctp_peeloff': : undefined reference to `sctp_can_peel_off' uipc_syscalls.o(.text+0x27b6): In function `sctp_peeloff': : undefined reference to `sctp_do_peeloff' rtsock.o(.text+0xb0d): In function `rt_newaddrmsg': : undefined reference to `sctp_addr_change' in_proto.o(.data+0xa8): undefined reference to `sctp_input' in_proto.o(.data+0xb0): undefined reference to `sctp_ctlinput' in_proto.o(.data+0xb4): undefined reference to `sctp_ctloutput' in_proto.o(.data+0xbc): undefined reference to `sctp_init' in_proto.o(.data+0xc8): undefined reference to `sctp_drain' in_proto.o(.data+0xcc): undefined reference to `sctp_usrreqs' in_proto.o(.data+0xdc): undefined reference to `sctp_input' in_proto.o(.data+0xe4): undefined reference to `sctp_ctlinput' in_proto.o(.data+0xe8): undefined reference to `sctp_ctloutput' in_proto.o(.data+0xfc): undefined reference to `sctp_drain' in_proto.o(.data+0x100): undefined reference to `sctp_usrreqs' in_proto.o(.data+0x110): undefined reference to `sctp_input' in_proto.o(.data+0x118): undefined reference to `sctp_ctlinput' in_proto.o(.data+0x11c): undefined reference to `sctp_ctloutput' in_proto.o(.data+0x130): undefined reference to `sctp_drain' in_proto.o(.data+0x134): undefined reference to `sctp_usrreqs' if_vr.o(.text+0x1366): In function `vr_init_locked': : undefined reference to `mii_mediachg' if_vr.o(.text+0x172b): In function `vr_tick': : undefined reference to `mii_tick' if_vr.o(.text+0x1f7f): In function `vr_ifmedia_sts': : undefined reference to `mii_pollstat' if_vr.o(.text+0x2da7): In function `vr_attach': : undefined reference to `mii_phy_probe' if_vr.o(.data+0x118): undefined reference to `miibus_driver' if_vr.o(.data+0x11c): undefined reference to `miibus_devclass' if_vr.o(.data+0x190): undefined reference to `miibus_readreg_desc' if_vr.o(.data+0x198): undefined reference to `miibus_writereg_desc' if_vr.o(.data+0x1a0): undefined reference to `miibus_statchg_desc' *** Error code 1
Stop in /usr/obj/usr/src/sys/MYKERNEL. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. ***************** Why? file MYKERNEL is in attachment
# machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident MYKERNEL # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI options AUDIT # Security event auditing # To make an SMP kernel, the next two lines are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC # CPU frequency control device cpufreq # Bus support. device eisa device pci #device agp # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers # device ahb # EISA AHA1742 family # device ahc # AHA2940 and onboard AIC7xxx devices # options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # # output. Adds ~128k to driver. # device ahd # AHA39320/29320 and onboard AIC79xx devices # options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # # output. Adds ~215k to driver. # device amd # AMD 53C974 (Tekram DC-390(T)) # device hptiop # Highpoint RocketRaid 3xxx series # device isp # Qlogic family # device ispfw # Firmware for QLogic HBAs- normally a module # device mpt # LSI-Logic MPT-Fusion # device ncr # NCR/Symbios Logic # device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') # device trm # Tekram DC395U/UW/F DC315U adapters # # device adv # Advansys SCSI adapters # device adw # Advansys wide SCSI adapters # device aha # Adaptec 154x SCSI adapters # device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. # device bt # Buslogic/Mylex MultiMaster SCSI adapters # device ncv # NCR 53C500 # device nsp # Workbit Ninja SCSI-3 # device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse #device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device le # AMD Am7900 LANCE and Am79C9xx PCnet #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') device vr # VIA Rhine, Rhine II # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device miibus # MII bus support #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit Ethernet #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet #device nfe # nVidia nForce MCP on-board Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device stge # Sundance/Tamarack TC9021 gigabit Ethernet #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device rum # Ralink Technology RT2501USB wireless NICs #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) #device fwip # IP over FireWire (RFC 2734,3146) #device dcons # Dumb console driver #device dcons_crom # Configuration ROM for dcons
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
