> Now, it is my suspicion that the apparent need for promisc at the router > end indeed is an apperent one and not really the router's fault but rather > the other end's. The other end, in this case, is the server below. > > If the server, with its single MIB, default-routes its packets through one > specific of its vlans which may not be the one, at the router's end, with > the corresponding IP network the traffic entered into the net, would it be > possible that there's something preventing them be received? Unless there's > promisc on, of course... > > I'll grab the laptop next time I think of it and have the switch monitor > traffic to it to see what really is on the wire, maybe that helps and gives > me a clue. I just keep forgetting the bl**dy thing each time I leave...
Ok, after a good portion of fiddling with the switch, it seems that you cannot copy traffic from link-aggregated ports to a monitor port on a Linksys SRW2016. Now out at my wits end here it seems. I'll try the FIB approach hopefully next week then. > > - On my "server", is there any way to set up individual > > > "default" routes (to the router) for each of the vlans short of > > > tucking the ezjails behind the vlan interfaces each into their own > > > FIB (btw,. has anyone ever done that?)? > > > > Yes, from FreeBSD-7.1 and beyond, there is support > > for up to 16 routing tables. Use the setfib command > > to select routing table for outgoing connections. > > So, I interpret your response as that I am correct, I have a single > default route per FIB, and that's it. Which effectively means that I do need > FIBs. I agree that this behaviour might make some sense :) > > > Something like, "setfib 10 jail $JAILOPTSANDARGS", > > in the jail case. You have to compile a kernel > > with the option ROUTETABLES=n. Read the message for > > revision 1.1485 from here: > > http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/conf/NOTES > (...) > Generally speaking, or rather, inquiring, has anyone ever done FIBs with > ezjail? It probably is very easy, and I consider(ed) looking into it myself > but I currently spend about max. an hour every 2-3 days on FreeBSE so I > don't really progress. Well, might eventually, but that'll be dunno when. But > well, such is life, and this is pleasure not work :) and I hope to learn > something useful on the way. (...) > [1] > http://lists.freebsd.org/pipermail/freebsd-arch/2007-December/007331.html Regards, Peter. -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01 _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
