sorry, i run 'wlandebug +scan' then i run 'ifconfig ath0 up scan' and this is the output:
ath0: ieee80211_start_scan: active scan, duration 2147 483647, desired mode auto, append, nopick, once ath0: scan set 1g, 6g, 11g, 7g, 13g, 2g, 3g, 4g, 5g, 8g, 9g, 10g, 12g dwell min 20 max 200 ath0: scan_next: chan 12g -> 1g [active, dwell min 20 max 200] ath0: scan_next: chan 1g -> 6g [active, dwell min 20 max 200] ath0: scan_next: chan 6g -> 11g [active, dwell min 20 max 200] ath0: scan_next: chan 11g -> 7g [active, dwell min 20 max 200] ath0: scan_next: chan 7g -> 13g [passive, dwell min 20 max 200] ath0: scan_next: chan 13g -> 2g [active, dwell min 20 max 200] ath0: scan_next: chan 2g -> 3g [active, dwell min 20 max 200] ath0: scan_next: chan 3g -> 4g [active, dwell min 20 max 200] ath0: scan_next: chan 4g -> 5g [active, dwell min 20 max 200] ath0: scan_next: chan 5g -> 8g [active, dwell min 20 max 200] ath0: scan_next: chan 8g -> 9g [active, dwell min 20 max 200] ath0: scan_next: chan 9g -> 10g [active, dwell min 20 max 200] ath0: scan_next: chan 10g -> 12g [passive, dwell min 20 max 200] ath0: scan_next: done, [ticks 90658763, dwell min 20 scanend 2238139744] ath0: notify scan done this might be a bit more usefull than the previouse one.. On Mon, Jul 6, 2009 at 6:40 PM, Atheer Elobadi <atheer.elob...@gmail.com>wrote: > tried this several times > # ifconfig ath0 up > # ifconfig ath0 list scan > > still no results .. > > if i run 'ifconfig ath0 scan' with 'wlandebug +debug' on, this is the > output: > > ath0: [ff:ff:ff:ff:ff:ff] send probe req on channel 4 > ath: scan_next: chan 4g -> 5g [active, dwell, min 20 max 200] > ath0: [ff:ff:ff:ff:ff:ff] send probe req on channel 2 > ath: scan_next: chan 2g -> 3g [active, dwell, min 20 max 200] > . > . > it continues on random channels > . > . > ath0: scan_next:done, [ticks 90275855, dwell min 20 scanend 2237756841 > ath0: notify scan done > > > > On Mon, Jul 6, 2009 at 6:29 PM, Paul B. Mahol <one...@gmail.com> wrote: > >> On 7/6/09, Atheer Elobadi <atheer.elob...@gmail.com> wrote: >> > i run 'wpa_supplicant -ddq -i ath0 -c /etc/wpa_supplicant.conf': >> > >> > Initializing interface 'ath0' conf '/etc/wpa_supplicant.conf' driver >> > 'default' ctrl_interface 'N/A' bridge 'N/A' >> > Configuration file '/etc/wpa_supplicant.conf' -> >> '/etc/wpa_supplicant.conf' >> > Reading configuration file '/etc/wpa_supplicant.conf' >> > Priority group 0 >> > id=0 ssid='ALEX' >> > Initializing interface (2) 'ath0' >> > EAPOL: SUPP_PAE entering state DISCONNECTED >> > EAPOL: KEY_RX entering state NO_KEY_RECEIVE >> > EAPOL: SUPP_BE entering state INITIALIZE >> > EAP: EAP entering state DISABLED >> > EAPOL: External notification - portEnabled=0 >> > EAPOL: External notification - portValid=0 >> > Own MAC address: 00:19:7d:be:8c:65 >> > wpa_driver_bsd_set_wpa: enabled=1 >> > wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1 >> > wpa_driver_bsd_del_key: keyidx=0 >> > wpa_driver_bsd_del_key: keyidx=1 >> > wpa_driver_bsd_del_key: keyidx=2 >> > wpa_driver_bsd_del_key: keyidx=3 >> > wpa_driver_bsd_set_countermeasures: enabled=0 >> > wpa_driver_bsd_set_drop_unencrypted: enabled=1 >> > Setting scan request: 0 sec 100000 usec >> > Added interface ath0 >> > State: DISCONNECTED -> SCANNING >> > Starting AP scan (broadcast SSID) >> > Trying to get current scan results first without requesting a new scan >> to >> > speed up initial association >> > Received 0 bytes of scan results (0 BSSes) >> > Scan results: 0 >> > Selecting BSS from priority group 0 >> > Try to find WPA-enabled AP >> > Try to find non-WPA AP >> > No suitable AP found. >> > Setting scan request: 0 sec 0 usec >> > Starting AP scan (broadcast SSID) >> > Received 0 bytes of scan results (0 BSSes) >> > Scan results: 0 >> > Selecting BSS from priority group 0 >> > Try to find WPA-enabled AP >> > Try to find non-WPA AP >> > No suitable AP found. >> > Setting scan request: 5 sec 0 usec >> > Starting AP scan (broadcast SSID) >> > >> > and it keeps on like that.. >> >> Does >> >> # ifconfig ath0 up >> >> and trying several times: >> >> # ifconfig ath0 list scan >> >> shows any results? >> >> Is anthing new displayed on console(vty0) ? >> -- >> Paul >> > > _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"