The reason for multiple posts and the titles is because The original post was considered spam by the freebsd-questions mailing list and webmaster. It had all of the relevant information in it. Next time you may want ask me why I do something before making an uninformed and asinine response.
Here is the information you asked for: %uname -a FreeBSD pocket-peoples.xxx.xxx.xxx.xxx 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 --- On Wed, 11/4/09, Daniel C. Dowse <dcdo...@gmx.net> wrote: From: Daniel C. Dowse <dcdo...@gmx.net> Subject: Re: need help with nvidia drivers To: "Super Biscuit" <super_bisq...@yahoo.com> Cc: freebsd-questions@freebsd.org Date: Wednesday, November 4, 2009, 9:52 AM On Tue, 3 Nov 2009 13:55:34 -0800 (PST) Super Biscuit <super_bisq...@yahoo.com> wrote: > I'm not able to use the glx settings on my computer. > RGB comes back as a double buffer error. > Hi, sorry but with that kind of questioning you won`t get any response, that includes your other posts as well. you should all ways try to describe the problem more specified. you should post your configs (/etc./X11/xorg.conf) and hardware specs (dmesg) and os release version( uname -a ) ,and the driver version you have installed, too. > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org" greets daniel -- [ The only reality is virtual ]
xorg.conf
Description: Binary data
Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC module_register: module dc/miibus already exists! Module dc/miibus failed to register: 17 module_register: module pci/dc already exists! Module pci/dc failed to register: 17 module_register: module cardbus/dc already exists! Module cardbus/dc failed to register: 17 module_register: module miibus/dcphy already exists! Module miibus/dcphy failed to register: 17 module_register: module miibus/pnphy already exists! Module miibus/pnphy failed to register: 17 module_register: module uhub/ums already exists! Module uhub/ums failed to register: 17 module_register: module rl/miibus already exists! Module rl/miibus failed to register: 17 module_register: module cardbus/rl already exists! Module cardbus/rl failed to register: 17 module_register: module pci/rl already exists! Module pci/rl failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Sempron(tm) Processor 3400+ (1989.82-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> real memory = 1877934080 (1790 MB) avail memory = 1818591232 (1734 MB) ACPI APIC Table: <HP-CPC AWRDACPI> ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <HP-CPC AWRDACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 6fdf0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1 nvidia0: <GeForce 8400 GS> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] atapci0: <ATI IXP400 SATA150 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f1ff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ohci0: <ATI SB400 USB Controller> mem 0xfe02e000-0xfe02efff at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xfe02d000-0xfe02dfff at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> mem 0xfe02c000-0xfe02cfff at device 19.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xda00-0xdaff mem 0xfddff000-0xfddff0ff irq 21 at device 3.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:15:f2:7a:dc:83 rl0: [ITHREAD] fwohci0: <VIA Fire II (VT6306)> port 0xdf00-0xdf7f mem 0xfddfe000-0xfddfe7ff at device 5.0 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:85:04:0b fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:85:04:0b fwe0: Ethernet address: 02:11:d8:85:04:0b fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:11:d8:00:00:85:04:0b @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1adc000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode emu10kx0: <Creative SBLive! [CT4760]> port 0xde00-0xde1f irq 16 at device 8.0 on pci2 emu10kx0: [ITHREAD] pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 pcm0: <SigmaTel STAC9721/23 AC97 Codec> pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 dc0: <ADMtek AN985 10/100BaseTX> port 0xd800-0xd8ff mem 0xfddfd000-0xfddfd3ff irq 17 at device 9.0 on pci2 miibus1: <MII bus> on dc0 acphy0: <ACXXX 10/100 media interface> PHY 1 on miibus1 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: Ethernet address: 00:04:5a:4f:ab:db dc0: [ITHREAD] acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 powernow0: <Cool`n'Quiet K8> on cpu0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub0 Timecounter "TSC" frequency 1989824981 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: CDRW <LITE-ON COMBO SOHC-4836K/SPJ2> at ata1-master UDMA33 ad4: 95396MB <Maxtor 6L100M0 BACE1G10> at ata2-master SATA150 GEOM_LABEL: Label for provider ad4s1a is ufsid/4ae6f122c8d5fbde. GEOM_LABEL: Label for provider ad4s1d is ufsid/4ae6f1235071c123. GEOM_LABEL: Label for provider ad4s1e is ufsid/4ae6f125b3b4ea41. GEOM_LABEL: Label for provider ad4s1f is ufsid/4ae6f1228fd52d52. GEOM_LABEL: Label for provider ad4s1g is ufsid/4ae6f12375b5629b. (probe7:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe7:umass-sim0:0:0:0): SCSI Status: Check Condition (probe7:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0 (probe7:umass-sim0:0:0:0): Medium not present (probe7:umass-sim0:0:0:0): Unretryable error (probe7:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 (probe7:umass-sim0:0:0:1): CAM Status: SCSI Status Error (probe7:umass-sim0:0:0:1): SCSI Status: Check Condition (probe7:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0 (probe7:umass-sim0:0:0:1): Medium not present (probe7:umass-sim0:0:0:1): Unretryable error (probe7:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 (probe7:umass-sim0:0:0:2): CAM Status: SCSI Status Error (probe7:umass-sim0:0:0:2): SCSI Status: Check Condition (probe7:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0 (probe7:umass-sim0:0:0:2): Medium not present (probe7:umass-sim0:0:0:2): Unretryable error (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition (probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0 (probe0:umass-sim0:0:0:3): Medium not present (probe0:umass-sim0:0:0:3): Unretryable error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device da2: 1.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device da3: 1.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad4s1a GEOM_LABEL: Label ufsid/4ae6f122c8d5fbde removed. GEOM_LABEL: Label for provider ad4s1a is ufsid/4ae6f122c8d5fbde. GEOM_LABEL: Label ufsid/4ae6f1228fd52d52 removed. GEOM_LABEL: Label for provider ad4s1f is ufsid/4ae6f1228fd52d52. GEOM_LABEL: Label ufsid/4ae6f1235071c123 removed. GEOM_LABEL: Label for provider ad4s1d is ufsid/4ae6f1235071c123. GEOM_LABEL: Label ufsid/4ae6f12375b5629b removed. GEOM_LABEL: Label for provider ad4s1g is ufsid/4ae6f12375b5629b. GEOM_LABEL: Label ufsid/4ae6f125b3b4ea41 removed. GEOM_LABEL: Label for provider ad4s1e is ufsid/4ae6f125b3b4ea41. GEOM_LABEL: Label ufsid/4ae6f122c8d5fbde removed. GEOM_LABEL: Label ufsid/4ae6f1228fd52d52 removed. GEOM_LABEL: Label ufsid/4ae6f1235071c123 removed. GEOM_LABEL: Label ufsid/4ae6f12375b5629b removed. GEOM_LABEL: Label ufsid/4ae6f125b3b4ea41 removed.
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"