Hi,I'm booting FreeBSD 8 from an USB stick, but when I do so, the console no longer works. They USB keyboard seems to do nothing, and during the boot process when the daemons are starting it seems like there is another keyboard attached on which the ENTER key is stuck. That is, while the daemons are starting the texts like "Starting sshd..." are interspaced with a bunch of blank lines, and after that, the screen fills with repeated copies of the login prompt. I cannot type anything. When I add or remove my keyboard it shows on the console as a bright white log line, which immediately scrolls off the screen again. Same when I remove it again.
When I boot from the hard disks, this does not happen. The USB stick contains exactly the same stuff as the hard drives, since I cloned the hard drive with a dump/restore.
Does anybody have a clue what's going on? Regards, Sebastiaan
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #1: Sat Nov 28 10:07:51 CET 2009
r...@piglet.home.sebster.com:/usr/obj/usr/src/sys/PIGLET
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>>
AMD Features=0x100000<NX>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2080657408 (1984 MB)
MPTable: <Intel Calistoga >
WARNING: Non-uniform processors.
WARNING: Using suboptimal topology.
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xbc80-0xbc87 mem
0xfe880000-0xfe8fffff,0xd0000000-0xdfffffff,0xfe840000-0xfe87ffff irq 16 at
device 2.0 on pci0
agp0: <Intel 945GME SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xfe780000-0xfe7fffff at device 2.1 on
pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xcc80-0xcc9f mem
0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 16 at device 0.0 on pci1
em0: Using MSIX interrupts
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 40:61:86:4a:c2:75
pcib2: <MPTable PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc80-0xdc9f mem
0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 17 at device 0.0 on pci2
em1: Using MSIX interrupts
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 40:61:86:4a:c2:76
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xbc00-0xbc1f irq 23 at
device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0f30
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb880-0xb89f irq 19 at
device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0f30
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb800-0xb81f irq 18 at
device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0f30
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb480-0xb49f irq 16 at
device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0f30
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe837c00-0xfe837fff
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: waiting for BIOS to give up control
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib3: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci3: <PCI bus> on pcib3
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xfebffc00-0xfebffcff
irq 16 at device 0.0 on pci3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:44:23:0e
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 60f0c2706000c27
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pmtimer0 on isa0
unknown: <PNP0c01> can't assign resources (memory)
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on
isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501
on isa0
uart0: [FILTER]
ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 pnpid PNP0400
on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart2: <16550 or compatible> at port 0x3e8-0x3ef irq 11 pnpid PNP0501 on isa0
uart2: [FILTER]
uart3: <16550 or compatible> at port 0x2e8-0x2ef irq 10 pnpid PNP0501 on isa0
uart3: [FILTER]
unknown: <PNP0501> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (irq)
unknown: <INT0800> can't assign resources (memory)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
uart1: [FILTER]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (irq)
unknown: <INT0800> can't assign resources (memory)
Timecounter "TSC" frequency 1596007848 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ad0: 953869MB <SAMSUNG HD103UJ 1AA01112> at ata0-master SATA150
ad1: 953869MB <SAMSUNG HD103UJ 1AA01112> at ata0-slave SATA150
GEOM_MIRROR: Device mirror/gm0 launched (1/2).
GEOM_MIRROR: Device gm0: rebuilding provider ad0s1.
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ugen4.2: <Corsair> at usbus4
umass0: <Corsair VoyagerGT, class 0/0, rev 2.00/11.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x0000
ugen0.2: <vendor 0x046d> at usbus0
ukbd0: <vendor 0x046d product 0xc30e, class 0/0, rev 1.10/1.80, addr 2> on
usbus0
kbd2 at ukbd0
uhid0: <vendor 0x046d product 0xc30e, class 0/0, rev 1.10/1.80, addr 2> on
usbus0
Root mount waiting for: usbus4
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/da0s1a
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Corsair VoyagerGT 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 15296MB (31326208 512 byte sectors: 255H 63S/T 1949C)
set vfs.root.mountfrom.options=rw
and then remove invalid mount options from /etc/fstab.
Loader variables:
vfs.root.mountfrom=ufs:/dev/da0s1a
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
eg. cd9660:/dev/acd0
This is equivalent to: mount -t cd9660 /dev/acd0 /
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
WARNING: /mnt was not properly dismounted
WARNING: / was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 356 files 30
WARNING: /usr was not properly dismounted
WARNING: /data was not properly dismounted
WARNING: /data/extra1 was not properly dismounted
WARNING: /data/extra2 was not properly dismounted
rl0: link state changed to UP
em0: link state changed to UP
em1: link state changed to UP
tap0: Ethernet address: 00:bd:e6:66:00:00
ugen2.2: <vendor 0x046d> at usbus2
ukbd1: <vendor 0x046d product 0xc30e, class 0/0, rev 1.10/1.80, addr 2> on
usbus2
kbd3 at ukbd1
uhid1: <vendor 0x046d product 0xc30e, class 0/0, rev 1.10/1.80, addr 2> on
usbus2
ugen2.2: <vendor 0x046d> at usbus2 (disconnected)
ukbd1: at uhub2, port 2, addr 2 (disconnected)
uhid1: at uhub2, port 2, addr 2 (disconnected)
arp: 10.0.99.1 moved from 00:bd:f1:02:00:00 to 00:0c:29:4d:d0:59 on tap0
ugen2.2: <vendor 0x046d> at usbus2
ukbd1: <vendor 0x046d product 0xc30e, class 0/0, rev 1.10/1.80, addr 2> on
usbus2
kbd3 at ukbd1
uhid1: <vendor 0x046d product 0xc30e, class 0/0, rev 1.10/1.80, addr 2> on
usbus2
# dmidecode 2.10
SMBIOS 2.4 present.
15 structures occupying 813 bytes.
Table at 0x000FD6E0.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 080015
Release Date: 04/13/2009
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 8.15
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: MSI
Product Name: A9830IMS
Version: 11
Serial Number: To Be Filled By O.E.M.
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: MSI
Product Name: A9830IMS
Version: 11
Serial Number: To be filled by O.E.M.
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: MSI
Type: Desktop
Lock: Not Present
Version: 0A
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Unknown
Manufacturer: Intel
ID: C2 06 01 00 FF FB E9 BF
Version: Genuine Intel(R) CPU N270 @ 1.60GHz
Voltage: 1.2 V
External Clock: 133 MHz
Max Speed: 1666 MHz
Current Speed: 1600 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 24 kB
Maximum Size: 24 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: Other
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Internal
Installed Size: 0 kB
Maximum Size: 0 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0008, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0009, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x000A, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000800003FF
Range Size: 2097153 kB
Physical Array Handle: 0x0009
Partition Width: 0
Handle 0x000B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0009
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x000C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x000B
Memory Array Mapped Address Handle: 0x000A
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x000D, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x000E, DMI type 127, 4 bytes
End Of Table
smime.p7s
Description: S/MIME Cryptographic Signature
