Hello list.
My laptop has a 200Gb drive, dual booting W7 and Freebsd 8.0-release-p2.
From dmesg
ad4: 190782MB <Seagate ST9200420ASG 3.ADE> at ata2-master SATA300
I've now got a 500Gb drive that I want to install instead.
Cloning the W7 has worked without problems. I starts when I replace the
disk in the PC.
I put the original drive 200Gb back and I have the new 500Gb drive in a
ESATA docking station.
Boot into Freebsd, this is in dmesg:
ad8: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
ad8: 476940MB <Seagate ST9500420ASG 0002SDM1> at ata4-master SATA300
Does someone know what the failure is about?
Next I do su and starts sysinstall.
In fdisk I create a slice and prees Q for finish.
Exit sysinstall and start it again.
Create my mountpoints with disklabel. I copy the values from the 200Gb
disk appart from home that I make bigger.
FreeBSD Disklabel Editor
Disk: ad8 Partition name: ad8s3 Free: 0 blocks (0MB)
Part Mount Size Newfs Part Mount Size
Newfs
---- ----- ---- ----- ---- ----- ----
-----
ad8s3a /mnt/newroot 1024MB *
ad8s3b swap 4096MB SWAP
ad8s3d /mnt/newtmp 2048MB *
ad8s3e /mnt/newvar 4096MB *
ad8s3f /mnt/newusr 20480MB *
ad8s3g /mnt/newhome remaining free space approx 300Gb *
I exit sysinstall and start it again and now the disk is layed out as
you can see below.
FreeBSD Disklabel Editor
Disk: ad8 Partition name: ad8s4 Free: 0 blocks (0MB)
Disk: ad8 Partition name: ad8s3 Free: 0 blocks (0MB)
Part Mount Size Newfs Part Mount Size Newfs
---- ----- ---- ----- ---- ----- ---- -----
ad8s4d <none> 30866MB *
ad8s3a <none> 1024MB *
ad8s3b swap 4096MB SWAP
ad8s3d <none> 2048MB *
ad8s3e <none> 4096MB *
ad8s3f <none> 20480MB *
ad8s3g <none> 28125MB *
I don't really understand this and would like some help to get it right.
Thanks
/Leslie
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"