Hi,
I am having a very difficult time understanding what is going on with this
FreeBSD machine..
I was having inet trouble so i put in a new router on my network (home
network)..
I have a FreeBSD machine on my network:
FreeBSD yeaguy.com 8.1-RELEASE FreeBSD 8.1-RELEASE #3: Thu Nov 4 20:43:41
PDT 2010 v...@yeaguy.com:/usr/obj/usr/src/sys/HBCA i386
I have windows machines on my network..
One of my windows machines is my laptop and I connect directly to the
router via WIFI without any trouble at all... I can browse any website
without complaint.
My FreeBSD system connects to my WIFI router just fine as well.. I am
seeing troubles browsing the inet with my FreeBSD machine (Xorg and opera)
Pulling up Google.com can take up to 30s..
My Other windows machine is using the FreeBSD as its gateway, I am running
ipnat. This pc suffers from the same issues as the FreeBSD box..
I configured the new router with the same ssid and wepkey.. so minimal
adjustments would have to be made for other WIFI users in the house..
Everyone is fine except me...
My server is fine as far as my Website is concerned.. I changed my DNS with
my host to point to my new WAN IP.. I can pull my page fine.. I can ssh to
my server fine from my phone, phones ip is from my Phones netowrk.. this is
not being done via WIFI on my phone..
So my Nat'd WIN PC and my FreeBSD Xorg cannot browse the internet like it
used to.. 30s to 40s to pull up google is just unacceptable, when I have my
laptop sitting here using the same WIFI router pulling it up in about
3ms...
Another odd symptom I am seeing is that when i issue the command 'alpine'
to check my email, it hangs for a good 30s.... So in my mind, Im thinking,
what changed?? My router and my Public IP.. thats it.. its almost like I
have my OLD WAN ip hardcoded somewhere causing a conflict.. I cannot find
it hardcoded anywhere..
Heres an example of what im seeing:
[...@yeaguy ~]$ ping google.com
PING google.com (72.14.204.147): 56 data bytes
64 bytes from 72.14.204.147: icmp_seq=0 ttl=52 time=85.460 ms
64 bytes from 72.14.204.147: icmp_seq=1 ttl=52 time=85.152 ms
64 bytes from 72.14.204.147: icmp_seq=2 ttl=52 time=84.048 ms
64 bytes from 72.14.204.147: icmp_seq=3 ttl=52 time=82.442 ms
^C
--- google.com ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 82.442/84.275/85.460/1.182 ms
[...@yeaguy ~]$ telnet google.com 80
Trying 72.14.204.147...
Connected to google.com. <it hung here for alot longer than 85ms>
Escape character is '^]'.
^]
telnet> q
Connection closed.
[...@yeaguy ~]$
I am unable to browse to nytimes.com via FreeBSD Opera browser or WIN PC
that is using the FreeBSD as the gateway, but I can telnet to it on tcp
port 80 just fine..
[...@yeaguy ~]$ telnet nytimes.com 80
Trying 199.239.136.200...
Connected to nytimes.com.
Escape character is '^]'.
get
<HTML><HEAD><TITLE>Bad request</TITLE></HEAD>
<BODY><H1>Bad request</H1>
Your browser sent a query this server could not understand.
</BODY></HTML>Connection closed by foreign host.
[...@yeaguy ~]$
Heres some config files:
[...@yeaguy ~]$ cat /etc/rc.conf
wlans_rum0="wlan0"
gateway_enable="YES"
ifconfig_wlan0="inet 192.168.1.169 netmask 255.255.255.0 ssid vicnet
wepmode on weptxkey 1 wepkey 1:0xF4AE43E9BA description WIFI"
defaultrouter="192.168.1.1"
apache22_enable="YES"
hald_enable="YES"
dbus_enable="YES"
samba_enable="YES"
nmbd_enable="YES"
smbd_enable="YES"
winbindd_enable="YES"
hostname="yeaguy.com"
ifconfig_em0="inet 10.1.1.1 netmask 255.255.255.0 broadcast 10.1.1.255
description LAN"
inetd_enable="YES"
linux_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
postfix_enable="YES"
sendmail_enable="NO"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"
firewall_enable="YES"
firewall_script="/etc/fire"
ipnat_enable="YES"
ipnat_program="/sbin/ipnat"
ipnat_rules="/etc/ipnat.rules"
ipnat_flags=""
#ipmon_enable="YES"
#ipmon_program="/sbin/ipmon"
#ipmon_flags="-Ds"
named_enable="YES"
ntpdate_enable="YES"
ntpdate_program="ntpdate"
ntpdate_flags="-b 0.north-america.pool.ntp.org"
mysql_enable="YES"
clamav_clamd_enable="YES"
clamav_freshclam_enable="YES"
amavisd_enable="YES"
#amavisd_ram="512m"
pf_enable="YES"
pf_rules="/etc/pf.conf"
pflog_enable="YES"
saver="daemon"
[...@yeaguy ~]$ ifconfig
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: LAN
options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
ether 00:16:76:bf:17:29
inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33200
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128
rum0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
ether 00:1e:e5:a8:bd:5a
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: WIFI
ether 00:1e:e5:a8:bd:5a
inet 192.168.1.169 netmask 0xffffff00 broadcast 192.168.1.255
media: IEEE 802.11 Wireless Ethernet OFDM/18Mbps mode 11g
status: associated
ssid vicnet channel 11 (2462 MHz 11g) bssid 00:22:6b:66:bf:74
country US authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit
txpower 0 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle
250
roam:rssi 7 roam:rate 5 protmode CTS
[...@yeaguy ~]$
[...@yeaguy ~]$ netstat -rn
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.1.1 UGS 1 2208 wlan0
10.1.1.0/24 link#1 U 4 16001 em0
10.1.1.1 link#1 UHS 0 0 lo0
127.0.0.1 link#4 UH 0 36 lo0
192.168.1.0/24 link#7 U 6 7123 wlan0
192.168.1.169 link#7 UHS 0 0 lo0
Internet6:
Destination Gateway Flags Netif
Expire
::1 ::1 UH lo0
fe80::%lo0/64 link#4 U lo0
fe80::1%lo0 link#4 UHS lo0
ff01:4::/32 fe80::1%lo0 U lo0
ff02::%lo0/32 fe80::1%lo0 U lo0
[...@yeaguy ~]$
yeaguy# ipnat -l
List of active MAP/Redirect filters:
map wlan0 10.1.1.0/24 -> 192.168.1.169/32 portmap tcp/udp 10000:60000
map wlan0 10.1.1.0/24 -> 192.168.1.169/32
List of active sessions:
MAP 10.1.1.190 53867 <- -> 192.168.1.169 54939 [69.147.83.34 80]
MAP 10.1.1.190 53401 <- -> 192.168.1.169 45879 [72.14.204.147 80]
MAP 10.1.1.190 53398 <- -> 192.168.1.169 18541 [72.14.204.147 80]
MAP 10.1.1.190 53397 <- -> 192.168.1.169 27460 [72.14.204.147 80]
yeaguy#
I am thinking of doing a fresh install to see if my issue clears.. I am
beyond frustrated.. A WAN IP and router change and now I have some odd
tick/hangup on the system???!!! that makes no sense.. if i put the old
router in place it works fine.. I really dont want to use the old router
either,, it requires a reboot daily.. it flakey...
I checked the router for ACLs and anything that might cause conflict but I
am not seeing anything.. I really cant see how its the new router.. my WIN
LAPTOP when connecting to the router works flawlessly... The only odd
thing I do see in regards to the router and FreeBSD box is the WEP
attributes:
ifconfig shows:
wepkey 1:40-bit // Router shows: WEP Encryption: "64 bits 10 hex digits"..
is that an issue??
Router is a Linksys WRT54G2... My router logs show in and out traffic
from the FreeBSD box.. so this is why Im thinking its the FreeBSD box...
Can i do a system wide grep on all files to see if i find the OLD WAN IP
hardcoded somewhere???
I have completely disable ipfw as well:
yeaguy# ipfw -q flush
yeaguy# ipfw show
65535 4145 3401628 allow ip from any to any
If anyone can assist Id be very greatful..
Thanks
Justin V.
